Millipore Sigma Vibrant Logo

AP4003705 グラスファイバーフィルター 接着剤未使用, AP40, 37 mm

0.7 µm pore size, hydrophilic glass fiber, 37 mm diameter

グラスファイバーフィルター 接着剤未使用, AP40, 37 mm: のSDS（安全データシート）、CoA（試験成績書）およびCoQ（品質証明書）、カタログなど製品関連の技術資料を入手いただけます。
View This Product on Sigma-Aldrich
AP4003705
500  
価格を検索中…
価格が見つかりません
Minimum Quantity needs to be mulitiple of
Maximum Quantity is
弊社照会 詳細を表示　
値引
()
 
—
弊社照会
—
現在国内在庫なし 現在国内在庫なし
現在国内在庫有り 
販売中止
在庫僅少
現在国内在庫あり
    Remaining : Will advise
      Remaining : Will advise
      注文対象外
      お問合せください
      Contact Customer Service

       

      お問合せください

      概要

      Replacement Information
      説明
      カタログ番号AP4003705
      説明グラスファイバーフィルター 接着剤未使用, AP40, 37 mm
      背景情報Overview
      Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

      Glass Fiber Filters with Binder Resin:
      Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

      Type AP15
      •Lowest dirt-holding capacity
      •Recommended prefilter for 0.2 to 0.6 µm filters

      Type AP20
      •Lower retention, higher dirt-holding capacity than AP15 filters
      •Recommended prefilter for 0.8 to 8.0 µm filters
      •Use upstream to protect type AP15 filters

      Type AP25
      •Added thickness yields same retention and greater dirt-holding capacity as AP20
      •Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
      •Use upstream to protect type AP15 filters

      Glass Fiber Filters without Binder Resin:
      The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

      Type APFA
      •Retains fine particles with good efficiency, even at high flow rates
      •Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
      •Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

      Type APFB
      •Higher mechanical strength when wet and greater loading capacity than type APFA filters
      •Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

      Type APFC
      •Greater retention, especially for fine particulate and microorganism removal than type APFA filters
      •Use for determining total suspended solids in drinking water
      •Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

      Type APFD
      •Thick filter with high flow and low retention
      •Use for clarifying suspensions containing particulates greater than 1.0 µm

      Type APFF
      •Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
      •Recommended for USEPA method 1311 for TCLP analysis

      Type AP40
      •Recommended for Standard Methods Total Suspended Solids 2540D
      •Recommended for USEPA method 1311 for TCLP analysis
      •Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
      •Recommended for determining volatile suspended matter in wastewater and industrial effluents
      参考資料
      製品情報
      HSコード7019 90 00
      フィルターコードAP40
      フィルターカラー白色
      最大操作温度550 °C
      フィルタータイプデプス フィルター
      アプリケーション
      アプリケーション0.7 µm pore size, hydrophilic glass fiber, 37 mm diameter
      Contaminant of Interest
      • 2,4,5-T, 2,4-D
      • Carbaryl
      • Pyrethrum
      • EPN
      • Malathion
      • Parathion
      • Chlorinated terphynl (60% chlorine)
      • Chrlorinated Triphenyl
      • Polychloroterphynl
      • PCT
      • Aroclor 5460
      • Strychnine, Strychnidin-10-one
      • Oil Mist of White Mineral Oil
      • Water-Insoluble Petroleum-based Cutting Oils
      • Cable Oil
      • Cutting Oil
      • Drawing Oil
      • Engine Oil
      • Heat-Treating Oils
      • Hydraulic Oils
      • Machine Oil
      • Transformer Oil
      • Ribavirin, Virazole, ICN 1229
      • Aldrin (Octalene, Aldrite, Aldrosol, HHDN)
      • Organotin Compounds (as Sn)
      Regulated Test Method Number
      • NIOSH 5001
      • NIOSH 5006
      • NIOSH 5008
      • NIOSH 5012
      • NIOSH 5014
      • NIOSH 5016
      • NIOSH 5026
      • NIOSH 5027
      • NIOSH 5502
      • NIOSH 5503
      生体情報
      湿潤性親水性
      物理化学情報
      ポアサイズ0.7 µm
      空隙率 %90%
      水流量
      • >300 (mL/min x cm²) at 27 in Hg
      寸法
      フィルター表面プレーン
      厚さ475 µm
      フィルター直径 (⌀)37 mm
      材料情報
      材質
      • グラスファイバー
      有害性情報
      GHSに関する安全性情報
      安全性情報
      製品使用について
      保管および輸送に関する情報
      パッケージ情報
      数量500
      輸配送情報
      補足情報
      規格
      Global Trade Item Number
      カタログ番号 GTIN
      AP4003705 04053252730870