Milli-Q® IQ 7003/05/10/15 Water Purification Systems
Recommended Products
-
1046990500 Sigma-Aldrich Immersion oil -
P2B030A25 Millipore Pellicon® 2 Maxi Cassette with Biomax® 30 kDa Membrane, A screen, 2.5 m² -
AB5605 Sigma-Aldrich Anti-4-Hydroxynonenal Antibody -
NU050/452-312 Millipore NovAseptic Valve, Valve Body, Tank Outlet Valve 180˚, Elbow 45˚ TC -
574776-10UG Sigma-Aldrich Swinholide A, Theonella swinhoei - CAS 95927-67-6 - Calbiochem -
SLM-246-B Sigma-Aldrich MEM / F12 Complete Medium, with NEAA, 2mM L-Glut and 10% FBS -
1250810001 Millipore MiniChrom Column Fractogel® SE Hicap (M), 5 ml -
117336 Millipore Filter Cover -
342000 Sigma-Aldrich Caspase Inhibitor, Negative Control - CAS 105637-38-5 - Calbiochem
Overview
The Milli-Q® IQ 7003/7005/7010/7015 system is a fully-integrated and modern lab water purification system delivering both superior quality ultrapure (Type 1) and pure (Type 2) water direct from a tap water source. Awarded the Greener Alternative Product label, the system uses less plastic and less electricity, and also uses mercury-free UV lamps. It integrates Elix® electrodeionization (EDI) technology, intuitive touchscreens, and Q-POD® ultrapure and E-POD® pure water dispensers. The system provides an ergonomic and compact design to improve lab productivity, reduce waste and accelerate research.
Specifications
Water Specifications / International Conformity
| Ultrapure, Type 1 water specifications1 (from Q-POD® dispenser) | |
| Resistivity at 25 °C2 | 18.2 MΩ·cm |
| TOC | ≤ 2 ppb (µg/L)3; Typically ≤ 5 ppb |
| Particles4,5 | No particles with size > 0.22 µm |
| Bacteria6 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)7 | < 0.001 EU/mL |
| RNases5 | < 1 pg/mL |
| DNases5 | < 5 pg/mL |
| Proteases5 | < 0.15 µg/mL |
| Flow rate | Up to 2 L/min |
| 1 These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2 Resistivity can also be displayed non-temperature-compensated as required by USP. 3 In the appropriate operating conditions, otherwise typically ≤ 5 ppb. 4 With Millipak® filter. 5 With Biopak® polisher. 6 With Millipak® or Biopak® filter when installed and used in a laminar flow hood. 7 With Biopak® polisher when installed and used in a laminar flow hood. |
|
| Pure, Type 2 water specifications1 | |
| Resistivity at 25 °C2 | > 5 MΩ·cm; Typically 10-15 MΩ·cm |
| TOC | ≤ 30 ppb |
| Production flow rate | 3 L/h (Milli-Q® IQ 7003) 5 L/h (Milli-Q® IQ 7005) |
| From an E-POD® dispenser with final filter, the following water quality specifications are achieved:1 | |
| Particles3,4 | No particles with size > 0.22 µm |
| Bacteria5 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)6 | < 0.001 EU/mL |
| RNases4 | < 1 pg/mL |
| DNases4 | < 5 pg/mL |
| Proteases4 | < 0.15 µg/mL |
| Flow rate | Up to 2 L/min |
| 1 These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2 Resistivity can also be displayed non-temperature-compensated as required by USP. 3 With Millipak® filter. 4 With Biopak® polisher. 5 With Millipak® or Biopak® filter when installed and used in a laminar flow hood. 6 With Biopak® polisher when installed and used in a laminar flow hood. |
|
| Feed water requirements | |
| Feed water | Potable tap water |
| Pressure | 1 – 6 bar |
| Conductivity | < 2000 µS/cm at 25 °C |
| Total Organic Carbon (TOC) | < 1 ppm |
| Temperature | 5 – 35 °C / 41 – 95 F |
System Specifications
| Electric power source voltage | 100 – 240 V ± 10% | |
| Electric power source frequency | 50 – 60 Hz ± 10% | |
| Purification Unit (7003/7005) | ||
| Dimensions (H x W x D) | 498 x 315 x 380 mm (19.6 x 12.4 x 15.0 in) | |
| Operating weight | 26.0 kg (57 lb) | |
| Purification Unit (7010/7015) | ||
| Dimensions (H x W x D) | 498 x 375 x 380 mm (19.6 x 14.8 x 15.0 in) | |
| Operating weight (7010) | 29.7 kg (65 lb) | |
| Operating weight (7015) | 30.0 kg (66 lb) | |
| Storage tank | ||
| 25 L Dimensions (H x W x D) Operating weight |
503 x 400 x 415 mm (19.8 x 15.7 x 16.3 in) 31.7 kg (70 lb) |
|
| 50 L Dimensions (H x W x D) Operating weight |
706 x 400 x 415 mm (27.8 x 15.7 x 16.3 in) 57.6 kg (127 lb) |
|
| 100 L Dimensions (H x W x D) Operating weight |
1118 x 400 x 415 mm (44.0 x 15.7 x 16.3 in) 110.9 kg (244 lb) |
|
| Q-POD® and E-POD® dispensers | |
| Dimensions (Maximum H x W x D) | 792 x 211 x 438 mm (31.2 x 8.3 x 17.3 in) |
| Operating weight | 5.5 kg (12.1 lb) |
| Electrical connection | Powered by purification unit (24 – 28 VDC) |
International Regulation Requirements
Declaration of CE and cUL Conformity:
The Milli-Q® IQ 7003, Milli-Q® IQ 7005, Milli-Q® IQ 7010 and Milli-Q® IQ 7015 systems have been tested by an independent and accredited company for compliance with CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. In addition, the Milli-Q® IQ 7003/7005/7010/7015 system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site: UL web site.
Ordering Information
Documentation
Related Products & Applications
Water Specifications / International Conformity
| Ultrapure, Type 1 water specifications1 (from Q-POD® dispenser) | |
| Resistivity at 25 °C2 | 18.2 MΩ·cm |
| TOC | ≤ 2 ppb (µg/L)3; Typically ≤ 5 ppb |
| Particles4,5 | No particles with size > 0.22 µm |
| Bacteria6 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)7 | < 0.001 EU/mL |
| RNases5 | < 1 pg/mL |
| DNases5 | < 5 pg/mL |
| Proteases5 | < 0.15 µg/mL |
| Flow rate | Up to 2 L/min |
| 1 These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2 Resistivity can also be displayed non-temperature-compensated as required by USP. 3 In the appropriate operating conditions, otherwise typically ≤ 5 ppb. 4 With Millipak® filter. 5 With Biopak® polisher. 6 With Millipak® or Biopak® filter when installed and used in a laminar flow hood. 7 With Biopak® polisher when installed and used in a laminar flow hood. |
|
| Pure, Type 2 water specifications1 | |
| Resistivity at 25 °C2 | > 5 MΩ·cm; Typically 10-15 MΩ·cm |
| TOC | ≤ 30 ppb |
| Production flow rate | 3 L/h (Milli-Q® IQ 7003) 5 L/h (Milli-Q® IQ 7005) |
| From an E-POD® dispenser with final filter, the following water quality specifications are achieved:1 | |
| Particles3,4 | No particles with size > 0.22 µm |
| Bacteria5 | < 0.01 CFU/mL |
| Pyrogens (endotoxins)6 | < 0.001 EU/mL |
| RNases4 | < 1 pg/mL |
| DNases4 | < 5 pg/mL |
| Proteases4 | < 0.15 µg/mL |
| Flow rate | Up to 2 L/min |
| 1 These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2 Resistivity can also be displayed non-temperature-compensated as required by USP. 3 With Millipak® filter. 4 With Biopak® polisher. 5 With Millipak® or Biopak® filter when installed and used in a laminar flow hood. 6 With Biopak® polisher when installed and used in a laminar flow hood. |
|
| Feed water requirements | |
| Feed water | Potable tap water |
| Pressure | 1 – 6 bar |
| Conductivity | < 2000 µS/cm at 25 °C |
| Total Organic Carbon (TOC) | < 1 ppm |
| Temperature | 5 – 35 °C / 41 – 95 F |
System Specifications
| Electric power source voltage | 100 – 240 V ± 10% | |
| Electric power source frequency | 50 – 60 Hz ± 10% | |
| Purification Unit (7003/7005) | ||
| Dimensions (H x W x D) | 498 x 315 x 380 mm (19.6 x 12.4 x 15.0 in) | |
| Operating weight | 26.0 kg (57 lb) | |
| Purification Unit (7010/7015) | ||
| Dimensions (H x W x D) | 498 x 375 x 380 mm (19.6 x 14.8 x 15.0 in) | |
| Operating weight (7010) | 29.7 kg (65 lb) | |
| Operating weight (7015) | 30.0 kg (66 lb) | |
| Storage tank | ||
| 25 L Dimensions (H x W x D) Operating weight |
503 x 400 x 415 mm (19.8 x 15.7 x 16.3 in) 31.7 kg (70 lb) |
|
| 50 L Dimensions (H x W x D) Operating weight |
706 x 400 x 415 mm (27.8 x 15.7 x 16.3 in) 57.6 kg (127 lb) |
|
| 100 L Dimensions (H x W x D) Operating weight |
1118 x 400 x 415 mm (44.0 x 15.7 x 16.3 in) 110.9 kg (244 lb) |
|
| Q-POD® and E-POD® dispensers | |
| Dimensions (Maximum H x W x D) | 792 x 211 x 438 mm (31.2 x 8.3 x 17.3 in) |
| Operating weight | 5.5 kg (12.1 lb) |
| Electrical connection | Powered by purification unit (24 – 28 VDC) |
International Regulation Requirements
Declaration of CE and cUL Conformity:
The Milli-Q® IQ 7003, Milli-Q® IQ 7005, Milli-Q® IQ 7010 and Milli-Q® IQ 7015 systems have been tested by an independent and accredited company for compliance with CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. In addition, the Milli-Q® IQ 7003/7005/7010/7015 system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site: UL web site.