Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KVGLA10FF1 Opticap® XL10 Durapore® 0.22 µm 3/4 in. TC/TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
KVGLA10FF1
1  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Replacement Information
Description
Catalogue NumberKVGLA10FF1
Trade Name
  • Opticap®
DescriptionOpticap® XL10 Durapore® 0.22 µm 3/4 in. TC/TC
References
Product Information
HS Code8421 29 90
Device ConfigurationCapsule
Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 3.4 bar (50 psid) @ 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Applications
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaDurapore®
SterilityOther
Sterilization3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.22 µm
Inlet ConnectionSanitary Flange
Outlet ConnectionSanitary Flange
Air Diffusion at 23 °C≤13.3 mL/min @ 2.75 bar (40 psig) in water
Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
Gravimetric ExtractablesThe extractables level was equal to or less than 25 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length10 in. (25 cm)
Length33.5 cm (13.2 in.)
Diameter14.5 cm (5.7 in.)
Filtration Area0.69 m²
Inlet to Outlet Width33.5 cm (13.2 in.)
Device Size10 in.
Inlet Connection Diameter3/4 in.
Outlet Connection Diameter3/4 in.
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Packaging Information
Material Size1
Material PackageDouble Easy-Open bag
Transport Information
Supplemental Information
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Global Trade Item Number
Catalogue Number GTIN
KVGLA10FF1 04053252459344

Documentation

Material Qualification Dossier

TitleVersion
1.0

Quality Management Dossier (Open Access)

Title

Operational Excellence Dossier

Title

Certificates of Quality

Title
Opticap XL 10 Capsule Durapore Membrane C7CA82855
Opticap XL 10 Capsule Durapore Membrane C7EA11646
Opticap XL 10 Capsule Durapore Membrane C7KA47766
Opticap XL 10 Capsule Durapore Membrane C0HB73213Z
Opticap XL 10 Capsule Durapore Membrane C0MB88713Z
Opticap XL 10 Capsule Durapore Membrane C0PB26098Z
Opticap XL 10 Capsule Durapore Membrane C1AB83280
Opticap XL 10 Capsule Durapore Membrane C1CB08005
Opticap XL 10 Capsule Durapore Membrane C1KB43480
Opticap XL 10 Capsule Durapore Membrane C1NB70414
Show more

Technical Info

Title
Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters

User Guides

Title
Opticap® XL Capsules and Opticap® XLT Capsules

Related Products & Applications

Product Families

Durapore® 0.1 µm and 0.22 µm Capsule Filters

Sterilizing-grade 0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high flow rates and throughputs.
Learn More >>

Durapore® 0.1 µm and 0.22 µm Capsule Filters

0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes for sterile liquid filtration
Learn More >>

Related Products By: Brand Facete

Opticap®

Categories

Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Durapore