Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

MCGL40S03 Millidisk® Cartridge 40-stack 0.22 µm Hydrophilic

Millidisk® Cartridge 40-stack 0.22 µm Hydrophilic MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
MCGL40S03
3  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Description
Catalogue NumberMCGL40S03
Trade Name
  • Millidisk®
DescriptionMillidisk® Cartridge 40-stack 0.22 µm Hydrophilic
Product Information
Device ConfigurationCartridge
Maximum Differential Pressure, bar (psid)Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)Forward - 4.1 bar (60 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 123 °C; Reverse - 0.7 bar (10 psi) @ 25 °C
Stack Design40 Stak
Cartridge CodeNot Applicable
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaDurapore®
SterilityOther
Sterilization5 SIP cycles of 60 min @ 135 °C; 5 autoclave cycles of 60 min @ 126 °C
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.22 µm
Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
Flow Rate53 L/min @ 2.8 bar ΔP
Gravimetric ExtractablesThe extractables level was equal to or less than 10 mg per sterilized device after 24 hours in water at controlled room temperature.
Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Filtration Area2000 cm²
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolysulfone
Packaging Information
Material Size3
Material PackageDouble Easy-Open bag
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL
Global Trade Item Number
Catalogue Number GTIN
MCGL40S03 04053252608551