Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

S7117 ApopTag® Plastic Coverslip

APOPTAG Plastic Coverslips are designed to be custom fitted to the specific APOPTAG kit application.

ApopTag® Plastic Coverslip MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
S7117
1000 ea  
Purchase on Sigma-Aldrich

Przegląd

Replacement Information
Description
Catalogue NumberS7117
Brand Family Chemicon®
Trade Name
  • ApopTag
  • Chemicon
DescriptionApopTag® Plastic Coverslip
OverviewAPOPTAG® Plastic Coverslips are designed to be custom fitted to the specific APOPTAG® kit application. Each coverslip has 2.5" x 1" dimensions.
References
Product Information
HS Code3822 19 90
Quality LevelMQ100
Applications
ApplicationAPOPTAG Plastic Coverslips are designed to be custom fitted to the specific APOPTAG kit application.
Application NotesPlastic coverslips can be used to assure that a constant volume of solution is applied per unit of specimen area. However, their handling time slows down the protocol. Each square centimeter of plastic coverslip will require the volume of reagent indicated in Table 5 (S7100, S7101) and Table 10 (S7110, S7111, S7160), so that the reagent volume applied per unit of tissue area can be held constant. The surface to be covered is always equal to the area of the plastic coverslip, not the area of the specimen.

Plastic coverslips may be trimmed to any desired size and shape. The kit's yield of specimens will be reduced if larger than standard coverslips are used.

When using ApopTag® Kits that contain the anti-digoxigenin antibodies (S7100, S7101, S7110, S7111), plastic coverslips can be used during the incubation steps with the following reagents: WORKING STRENGTH TdT, and the ANTI-DIGOXIGENIN ANTIBODY. When using the ApopTag® Fluorescein Direct Kit (S7160), the plastic coverslips can be used during incubation steps with WORKING STRENGTH TdT.

A basic coverslip method is described as follows:

To make a pair of "standard area" (~5 cm2) specimen coverslips, cut a plastic coverslip (provided) into two equal halves, and fold up a 1 cm handling tab across the width, then crease sharply (See Figure 3 in insert).

Drain one slide for approximately 10 seconds, and then tap off drops on a paper towel on the benchtop. Blot back and sides of the slide with a folded wipe. Carefully blot the area around the tissue section or cells, or else vacuum up solution using a pipette attached to an aspirator vacuum.

Apply reagent solution to one end of the area to be covered, using a dropper bottle or pipette as required.

Grasp the plastic coverslip by the handling tab and touch its opposite end to the droplet of reagent on the slide. Slightly arching the coverslip, roll it slowly downward, causing the solution to spread by capillary action. If solution does not spread evenly, tilt the slide until the flow reaches all edges.

Apply plastic coverslips to microscope slides so as to minimize trapped air bubbles, which may cause variable enzyme reaction or detection.

Place the slide across the pipettes, face-up and level, inside the humidified chamber. The slide edges should not touch anything so as to prevent drainage of the reagent.
Biological Information
Physicochemical Information
Dimensions
Materials Information
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Usage Statement
  • Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
Storage and Shipping Information
Storage ConditionsStore at room temperature.
Packaging Information
Material Size1000 ea
Transport Information
Supplemental Information
Specifications
Global Trade Item Number
Numer katalogowy GTIN
S7117 08436037122644

Documentation

ApopTag® Plastic Coverslip Certificates of Analysis

TitleLot Number
APOPTAG#174; PLASTIC COVERSLIP - 2020303 2020303
APOPTAG#174; PLASTIC COVERSLIP - 2080926 2080926
APOPTAG#174; PLASTIC COVERSLIP - 2207271 2207271
APOPTAG® PLASTIC COVERSLIP 2953816
APOPTAG® PLASTIC COVERSLIP 2931165
APOPTAG® PLASTIC COVERSLIP 3156778
APOPTAG® PLASTIC COVERSLIP 3157547
APOPTAG® PLASTIC COVERSLIP 3016681
APOPTAG® PLASTIC COVERSLIP 2839840
APOPTAG® PLASTIC COVERSLIP - 2388916 2388916
Show more