Airborne Radioactive Particle Monitoring
For collection of airborne radiactive particles. Black backing ensures proper orientation.
Więcej
For collection of airborne radiactive particles. Black backing ensures proper orientation. Mniej
More>>
Less<<
Recommended Products
Overview
Specifications
Ordering Information
Powiązane produkty i zastosowania
Związane produkty według: Application Facete
| Sample Preparation |
| Dialysis and Filtration |
Związane produkty według: Brand Facete
| Fluoropore™ |
Kategorie
| Reagents, Chemicals and Labware > Lab Filtration > Filter Discs and Membranes |
- High collection efficiency
- Extremely low pressure drop
- Higher throughput capacity
- Black backing ensures proper orientation
Improves Data Collection
Unlike fibrous filter media that trap particles in their matrix, Fluoropore (hydrophobic PTFE) membranes collect particles on their surface. This surface collection provides better detection efficiencies and lower FWHM measurements.*
Choice of Pore Sizes
Fluoropore membranes are available in 3 and 5 µm pore sizes. The smaller pore size provides low FWHM. The larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.
Contrasting Backing Material
The contrast between the top (white side) and bottom (black side) of the filter prevents incorrect installation in sampling devices.
*FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.
Performance
)
)
| Pore Size | 3.0 µm | 5.0 µm |
| Clean Water Flow Rate | 286 mL/min x cm² | 122 mL/min x cm² |
| Minimum Bubble Point, at 23 °C | ≥0.1 bar, air with methanol | ≥0.48 bar, air with water |
| Air Flow Rate | 20 L/min x cm² | 6 L/min x cm² |
| Porosity % | 85% | 85% |
| Minimum Thickness | 150 µm | 150 µm |
| Maximum Operating Temperature | 130 °C | 130 °C |