AFS® D Water Purification System
Cost-effective solution for analyzers with degassed pure water needs of up to 320 Liters daily
Więcej
Cost-effective solution for analyzers with degassed pure water needs of up to 320 Liters daily Mniej
More>>
Less<<
Związane zasoby
Recommended Products
Overview
Specifications
Ordering Information
Documentation
Powiązane produkty i zastosowania
Związane produkty według: Application Facete
| AFS |
Związane produkty według: Brand Facete
| AFS® |
Kategorie
| Lab Water Purification > AFS® Clinical Laboratory Reagent Water (CLRW) Biomedical Water Systems |
CLRW quality
AFS® D Systems provide a cost-effective, low maintenance water purification solution for analyzers with degassed pure water needs up to 320 L daily. AFS® D systems combine complementary water purification techniques; Complete pretreatment, advanced reverse osmosis (RO), Q-Gard® polishing pack, exposure to a bactericidal UV lamp, degassing, and final 0.22 µm filtration ensure a reliable and consistent water quality. Water produced by the systems complies with the Clinical and Laboratory Standards Institute® (CLSI) guideline for clinical laboratory reagent water (CLRW). Depending on daily volume needs, different production flow rates are available (8 and 16 L/h).
The systems are designed to fulfill accreditation needs (such as CAP™ 15189 accreditation to the ISO® 15189:2007 standard), and have full monitoring and water quality archiving capabilities that allow storage of up to six months of data. Activation of Millitrack® Essential e-Solution allows easy, rapid access to this information and also enhances data management control and provides remote system access.
User friendly & easy maintenance
Robust AFS® D systems require little maintenance, which means less analyzer downtime. Systems have a small footprint and can be installed wherever it is convenient in the laboratory: on a wall, on or under the bench, or on a cart. AFS® D systems are customizable with a wide range of options and accessories, including reservoirs, a sanitization kit and an aeration kit. Optimized lifetimes for the systems’ pretreatment and polishing packs, as well as low feed water consumption make AFS® D systems a cost-effective choice.
Water Specifications
AFS® D Essential CLRW water (CLSI Clinical Laboratory Reagent Water)
| Resistivity at 25 °C | > 15 MΩ•cm | ||
| TOC | Typically < 30 ppb | ||
| Bacteria | < 1 CFU/mL | ||
| Silica | < 5 µg/L | ||
| Dissolved oxygen | Typically 6 - 8 ppm | ||
| System | Permeate Flow Rate | Peak Dispense Rate (to atmosphere) | Dispensing pressure to analyzer |
| AFS® 8D | 8 L/h | Up to 0.6 L/min* | 1 bar ± 10 % (13-16 psi)* |
| AFS® 16D | 16 L/h | Up to 0.6 L/min* | 1 bar ± 10 % (13-16 psi)* |
| * Dispensing to atmosphere (without any flow restriction due to the analyzer) | |||
Feed water
| Feed water quality | Potable |
| Feed water pressure | 1 - 6 bar |
| Feed water temperature | 5 - 35 °C |
| Minimum flow rate feed | > 5 L min at 2 bar |
| Total chlorine * | < 3 ppm |
| Langelier Saturation Index | < 0.3 |
| Maximum Fouling Index (SDI) | < 12 |
| Tap water connection | ½” Gaz M |
| * For feed water with total chlorine concentration between 1 ppm and 3 ppm, Merck Millipore suggests the use of an external PrePak. | |
System Specifications
| Dimensions (H x W x D) | 470 x 268 x 426 mm (18.5 x 10.6 x 16.8 in) |
| Operating weight | < 22.2 kg (49 lb) |
| Electric power supply voltage | 100 - 240 V +/- 10% |
| Electric power supply frequency | 50 - 60 Hz +/- 10% |
| Power consumption | 200 W or 250 VA |
| AFS® D main unit data connection | Ethernet (RJ45) |
Safety
The AFS® D system is tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The AFS® D system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site ( http://www.ul.com).