Series 4000™ Single-Round Filter Housings
Reliable filter housing design to meet all your biopharmaceutical filtration needs
More
Reliable filter housing design to meet all your biopharmaceutical filtration needs Less
More>>
Less<<
Recommended Products
-
ZF3000206 Milli-Q ZF3000206 -
820078 Sigma-Aldrich 4-Amino-5-hydroxynaphthalene-2,7-disulfonic acid monosodium salt -
1071509025 Supelco Paraffin -
MMHEADEZ1 Millipore Milliflex Oasis® Head for EZ® Fit Filtration unit -
110285 Millipore LB broth (MILLER) -
110649 Millipore Bacillus subtilis (BGA) spore suspension
Overview
Specifications
Ordering Information
Documentation
Related Products & Applications
Series 4000™ have been designed in accordance with Life Sciences industry’s demand for high-quality and cost-effective products.
Our Housing’s Series S4000™ is suitable for a wide range of applications which enables to have low dead volume, minimizing product loss and enhancing cleanability.
The product is available in T-Line and In-Line design including the 5,10,20,30 inch sizes in Code 7.
If needed, we can provide housing designs customized to meet customer’s specific application.
| Description | North America and Europe | ||
| Pressure Equipment Directive | Series 4000™ housings are designed and manufactured according to Sound Engineering Practice (SEP) Series 4000™ 30 inches housings comply with the essential safety requirements of product Cat I of the Pressure Equipment Directive (2014/68/EU) for Gaz group 2 and liquid group 1 |
||
| Biocompatibility | FDA Indirect Food Additive Requirements All seal materials meet the FDA Indirect Food Additive requirements cited in 21 Code of Federal Regulations, section 177–2600 for rubber compounds or 177.1550 for fluorocarbon resin, based on information provided by raw material suppliers USP <88>Class VI Seal materials* meet the criteria for Class VI testing based on USP <88> Biological Reactivity, in vivo * Exception of PTFE seal material Animal origin statement YES |
||
| Operating Conditions Range | Design calculation for all housing configurations: | ||
| 1 to 10 bar at 25 °C 1 to 7 bar at 60 °C 1 to 6 bar at 80 °C 1 to 3.2 bar at 150 °C |
14.5 to 145 psig at 77 °F 14.5 to 100 psig at 140 °F 14.5 to 87 psig at 176 °F 14.5 to 46 psig at 293 °F |
100 to 970 kPa at 25 °C 100 to 700 kPa at 60 °C 100 to 600 kPa at 80 °C 100 to 320 kPa at 150 °C |
|
| Materials of Construction | Wetted parts (all surfaces in contact with the product) 316 L (EN 1.4404) stainless steel Bell to base gasket: Silicone Plunger valve seal tip: PTFE (if applicable) Non wetted part Plunger valve seal: Silicone (if applicable) |
||
| Surface finish for stainless steel wetted parts | Electropolished Ra ≤ 0.38 μm (15 μinch) internal Ra ≤ 0.8 μm (32 μinch) external |
||
| Cartridge compatibility | Adapter code Code 7 Compatible cartridges have two 2-226 O-rings and locking tabs Cartridge diameter Recommended: 6.9 cm (2.7 inch) |
||
| Clamp | 4 in. sanitary flange, 304 stainless steel clamps | ||
| Base Type | Wire form or recessed base | ||
| Design | T-Line, In-Line | ||
| Quality | All housings are shipped with a complete Documentation Package guaranteeing conformance to stated requirements. Main content of the Documentation Package:
|
||