Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KWLCA04FF3 Opticap® XL4 Milligard® Low Protein Binding 1.2/0.5 µm 3/4 in. TC/TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
KWLCA04FF3
3  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Description
Catalogue NumberKWLCA04FF3
ReplacesKWSCL4FF3
Trade Name
  • Opticap®
DescriptionOpticap® XL4 Milligard® Low Protein Binding 1.2/0.5 µm 3/4 in. TC/TC
Product Information
FormatDouble Layer
Device ConfigurationCapsule
Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange
Filter GradeLow Protein Binding Milligard® Media
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaMilligard® LPB
Sterilization3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
Physicochemical Information
Pore Size1.2 / 0.5 µm
Inlet ConnectionSanitary Flange
Outlet ConnectionSanitary Flange
Gravimetric ExtractablesThe extractables level was equal to or less than 110 mg per capsule after a 2 L flush and 24 hours in water at controlled room temperature.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length4 in. (10 cm)
Length19.6 cm (7.7 in.)
Diameter12.5 cm (4.9 in.)
Filtration Area0.16 m²
Inlet to Outlet Width19.6 cm (7.7 in.)
Device Size4 in.
Inlet Connection Diameter3/4 in.
Nominal Pore Size1.2 / 0.5 µm
Outlet Connection Diameter3/4 in.
Materials Information
Chemistry
  • Low Protein-Binding Mixed Cellulose Esters (MCE)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolyester
Vent Cap MaterialPolypropylene (PP)
Packaging Information
Material Size3
Material PackageDouble Easy-Open bag
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Global Trade Item Number
Catalogue Number GTIN
KWLCA04FF3 04053252567742