Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

480005 Sodium hydroxide solution 20% low iron

Overview

Key Spec Table

CAS #
1310-73-2

Products

Catalogue NumberPackaging Qty/Pack
4800059200 Plastic barrel 200 l
Description
Catalogue Number480005
Product Information
CAS number1310-73-2
HS Code2815 12 00
Quality LevelMQ500
Physicochemical Information
Density1.22 g/cm3 (20 °C)
pH value14 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Statement(s)H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)P234: Keep only in original packaging.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
Signal WordDanger
Storage class8B Non-combustible, corrosive hazardous materials
WGKWGK 1 slightly hazardous to water
Disposal13
Bases and alcoholates should be diluted if necessary by carefully stirring them into water and then neutralized (protective gloves, fume cupboard!) with hydrochloric acid (Cat. No. 100312). Before placing in container D, check the pH with pH universal indicator strips (Cat. No. 109535).
Safety Information
Categories of dangercorrosive
Storage and Shipping Information
StorageNoTempLimit
Transport Information
Declaration (railroad and road) ADR, RIDUN 1824 , 8, II
Declaration (transport by air) IATA-DGRUN 1824 , 8, II
Declaration (transport by sea) IMDG-CodeUN 1824 , 8, II, Segregation Group: 18 (Alkalis)
Specifications
Assay (acidimetric,NaOH)19.8 - 20.2 %
Identitypasses test
Appearance of solutionpasses test
Carbonate (as Na₂CO₃)≤ 0.6 %
Chloride (Cl)≤ 50 ppm
Sulfate (SO₄)≤ 30 ppm
Al (Aluminium)≤ 10 ppm
Fe (Iron)≤ 0.6 ppm
Residual solvents (ICH Q3C)...excluded by production process
Endotoxins≤ 2.0 I.U./ml

Filtered with 0.2 µm
This product has been manufactured from Sodium hydroxide pellets Ph Eur, BP, JP, NF and water for injection USP. Water for injection USP has been prepared for this product by using purified water according to Ph Eur.
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).

Filtered with 0.2 µm
This product has been manufactured from Sodium hydroxide pellets Ph Eur, BP, JP, NF and water for injection USP. Water for injection USP has been prepared for this product by using purified water according to Ph Eur, JP.
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Global Trade Item Number
Catalogue Number GTIN
4800059200 04027269223700