Millipore Sigma Vibrant Logo

AP4002405 Filtro de fibra de vidrio sin ligante, AP40, 24 mm

0.7 µm pore size, hydrophilic glass fiber, 24 mm diameter

View Products on Sigmaaldrich.com
AP4002405
500  
Recuperando precio...
No pudo obtenerse el precio
La cantidad mínima tiene que ser múltiplo de
Maximum Quantity is
Al finalizar el pedido Más información
Ahorró ()
 
—
Solicitar precio
—
Disponibilidad a confirmar Disponibilidad a confirmar
Ingrese cantidad 
Suspendido
Cantidades limitadas disponibles
Debe confirmarse disponibilidad
    El resto: se avisará
      El resto: se avisará
      Se avisará
      Póngase en contacto con el Servicio de Atención al Cliente
      Contact Customer Service

       

      Póngase en contacto con el Servicio de Atención al Cliente

      Descripción

      Replacement Information
      Descripción
      Número de catálogoAP4002405
      DescripciónFiltro de fibra de vidrio sin ligante, AP40, 24 mm
      Información preliminarOverview
      Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

      Glass Fiber Filters with Binder Resin:
      Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

      Type AP15
      •Lowest dirt-holding capacity
      •Recommended prefilter for 0.2 to 0.6 µm filters

      Type AP20
      •Lower retention, higher dirt-holding capacity than AP15 filters
      •Recommended prefilter for 0.8 to 8.0 µm filters
      •Use upstream to protect type AP15 filters

      Type AP25
      •Added thickness yields same retention and greater dirt-holding capacity as AP20
      •Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
      •Use upstream to protect type AP15 filters

      Glass Fiber Filters without Binder Resin:
      The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

      Type APFA
      •Retains fine particles with good efficiency, even at high flow rates
      •Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
      •Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

      Type APFB
      •Higher mechanical strength when wet and greater loading capacity than type APFA filters
      •Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

      Type APFC
      •Greater retention, especially for fine particulate and microorganism removal than type APFA filters
      •Use for determining total suspended solids in drinking water
      •Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

      Type APFD
      •Thick filter with high flow and low retention
      •Use for clarifying suspensions containing particulates greater than 1.0 µm

      Type APFF
      •Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
      •Recommended for USEPA method 1311 for TCLP analysis

      Type AP40
      •Recommended for Standard Methods Total Suspended Solids 2540D
      •Recommended for USEPA method 1311 for TCLP analysis
      •Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
      •Recommended for determining volatile suspended matter in wastewater and industrial effluents
      Referencias bibliográficas
      Información del producto
      Código del filtroAP40
      Color del filtroBlanco
      Temperatura de funcionamiento máxima550 °C
      Tipo de filtroFiltro en profundidad
      Aplicaciones
      Aplicación 0.7 µm pore size, hydrophilic glass fiber, 24 mm diameter
      Información biológica
      HumectabilidadHidrófila
      Información fisicoquímica
      Tamaño de poro7.0 µm
      Porosidad %90%
      Caudal de agua
      • >300 (mL/min x cm²) at 27 in Hg
      Dimensiones
      Superficie del filtroLisa
      Grosor475 µm
      Diámetro del filtro (⌀)24 mm
      Información de materiales
      Química
      • Fibra de vidrio
      Información toxicológica
      Información de seguridad según el GHS
      Información de seguridad
      Declaraciones de uso del producto
      Información de almacenamiento y transporte
      Información sobre embalaje
      Cantitad500
      Información de transporte
      Información complementaria
      Especificaciones
      Global Trade Item Number
      Número de referencia GTIN
      AP4002405 04053252741401

      Documentation