Le fait de fermer ne sauvegardera pas votre configuration à moins que vous n'ajoutiez l'article à votre Panier d'achat ou à vos Favoris.
Cliquer sur OK pour fermer l'outil MILLIPLEX® MAP ou sur Annuler pour retourner à votre sélection.
Choisissez des Panels configurables & des Kits préconfigurés - OU - des MAPmate™ de signalisation cellulaire
Concevez vos kits MILLIPLEX® MAP et obtenez leur prix.
Panels configurables & Kits préconfigurés
Notre large gamme est constituée de panels multiplex qui vous permettent de choisir, au sein d'un panel, les analytes qui répondent le mieux à vos besoins. Sur un autre onglet, vous pouvez choisir un format cytokine préconfiguré ou un kit Simplex.
Kits de signalisation cellulaire & MAPmate™
Choisissez des kits préconfigurés qui permettent d'explorer l'ensemble des voies ou des processus. Ou concevez vos propres kits en choisissant des Simplex MAPmate™ et en suivant les instructions fournies.
Les MAPmate™ suivants ne peuvent pas être utilisés ensemble : -des MAPmate™ qui nécessitent des tampons différents -des paires de MAPmate™ totaux et phospho-spécifiques, par ex. GSK3β total et GSK3β (Ser 9) -des MAPmate™ PanTyr et spécifiques d'un site, par ex. Récepteur Phospho-EGF et phospho-STAT1 (Tyr701) -Plus d'un phospho-MAPmate™ pour une seule cible (Akt, STAT3). -GAPDH et β-Tubuline ne peuvent pas être utilisés avec les kits ou les MAPmate™ contenant panTyr.
.
Référence
Guide d'achat
Qté
Liste
Cet article a été ajouté à vos favoris.
Sélectionner une espèce, un type de panel, un kit ou un type d'échantillon
Pour commencer à concevoir votre kit MILLIPLEX® MAP, sélectionnez une espèce, un type de panel ou un kit d'intérêt.
Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
Cet article a été ajouté à vos favoris.
Espèce
Type de panel
Kit sélectionné
Qté
Référence
Guide d'achat
Qté
Prix tarif
96-Well Plate
Qté
Référence
Guide d'achat
Qté
Prix tarif
Ajouter des réactifs supplémentaires (Un kit "Buffer and Detection Kit" est nécessaire pour une utilisation avec les MAPmate™)
Qté
Référence
Guide d'achat
Qté
Prix tarif
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
Option de gain de place Nos clients qui commandent plusieurs kits peuvent choisir d'économiser de l'espace de stockage en éliminant l'emballage de chaque kit et de recevoir les composants de leur essai multiplex conditionnés sous poches en plastique pour un stockage plus compact.
Cet article a été ajouté à vos favoris.
Ce produit a été ajouté à votre panier.
Vous pouvez maintenant concevoir un autre kit personnalisé, choisir un kit pré-configuré, régler vos achats ou fermer l'outil de commande.
Providing water of appropriate physical and chemical quality is probably the most important factor for the care and maintenance of captive fish. The water quality and temperature should be optimized for the specific species of fish being used.
The following water contaminants should be avoided when preparing water for fish tanks:
Chlorine and Chloramine Chlorine is highly toxic to fish even at levels as low as 0.1 ppm. Chloramine is even more toxic than chlorine because it is more stable in water. Chloramine penetrates in the blood of fish and binds to the iron of the hemoglobin in red blood cells, causing a reduction in the cells capacity to carry oxygen. Activated Carbon, placed up-stream of the reverse osmosis membrane of water purification systems is known to remove efficiently these oxidizing agents.
Ammonia, Nitrites, Nitrates, Phosphate Ammonia is toxic in both freshwater and saltwater tanks. Its toxicity increases with temperature and pH. Even low levels of ammonia can stress fish and make them vulnerable to diseases. Nitrite is not as toxic as ammonia, but can stress the fish as well. Nitrite may not have readily visible effects but it interferes with the oxygen metabolism and can affect the physiology of the fish (and therefore research results). Nitrate is less toxic than ammonia and nitrite, but it can also cause stress in fish and should be kept at a low level. Phosphate levels should be carefully controlled, as it will lead to algae growth. Algae consume oxygen, lowering the oxygen level in the tank. Using reverse osmosis decreases the overall ionic concentration of tap water and ensures suitable ionic concentrations.
Heavy metals Heavy metals (copper, iron, zinc, lead …) can be toxic to fish, and should be as low as possible.
Variations in pH Fish are very sensitive to variations in pH. A pH above 8 may prevent the growth of denitrifying bacteria, leading to the accumulation of toxic nitrogen compounds in the water. Low pH (below 6) may have toxic effects on fish. By reducing the levels of ions and organic acids present in water as much as possible, one can keep the pH of water in the vicinity of 7.
Hardness Depending on the fish species, different levels of water hardness may be required. Water hadness is important to fish health because it affects osmoregulation. Hardness must be controlled because it also has an effect on pH and pH stability. Anti-scaling agents are usually present up-stream of the reverse-osmosis membrane of water purification systems, thereby ensuring low levels of hardness.
Organics Some organics, such as pesticides, endocrine disrupters, etc. which may be present in tap water, may affect the health of the fish. Organics can also be used as nutrients by bacteria. In turn, the proliferation of bacteria will lower the oxygen level in the tank Organics can also affect spawning. Most organic molecules are efficiently removed by activated carbon and reverse osmosis.
Bacteria While some bacteria are beneficial to fish tanks because they eliminate nitrogen waste, bacterial levels in the make-up water should be kept at a low level. Bacteria can consume large amounts of oxygen, thereby depleting oxygen levels in the tank. In addition, some bacteria may affect the health of the fish.
Flow-through fish tanks require fleshly prepared water. Recirculating water systems require make-up water to replace the water lost by evaporation, and also replace about 10 to 15% of the tank water. It is important to keep a constant water quality in fish tanks. In addition, fish raised in one water quality tend to do poorly when transferred to a different water quality. It is not recommended to use tap water because it may contain some or all the contaminants listed above, and it may vary with the season or the location. In conclusion, water purified by reverse osmosis is usually recommended for this application.