Millipore Sigma Vibrant Logo

391947 Hydroxylapatite, Fast Flow

View Products on Sigmaaldrich.com
391947
Preis & Verfügbarkeit

Übersicht

Replacement Information

Preis & Verfügbarkeit

Bestellnummer VerfügbarkeitVerpackung St./Pkg. Preis Menge
391947-100GM
Verfügbarkeit wird abgerufen...
Eingeschränkte Verfügbarkeit
Eingeschränkte Verfügbarkeit
Lieferbar 
Produkt wurde eingestellt
Begrenzter Lagerbestand
Bestätigung der Verfügbarkeit erforderlich
    Restmenge: Angebot folgt
      Restmenge: Angebot folgt
      Bitte erfragen
      Kontakt zum Kundenservice
      Contact Customer Service

      Glasflasche 100 gm
      Preis wird abgerufen...
      Preis nicht abrufbar
      Die Mindestmenge muss ein Vielfaches sein von
      Maximum Quantity is
      Bei Bestätigung Weitere Informationen
      Sie haben () gespart
       
      Bitte erfragen
      Description
      OverviewA form of calcium phosphate used in preparative procedures for purification of proteins and nucleic acids in which high flow rate and binding capacity are desired. BSA binding capacity: >12 mg/g; DNA binding capacity: >700 µg/g.
      Catalogue Number391947
      Brand Family Calbiochem®
      SynonymsHA
      References
      Product Information
      CAS number1306-06-5
      FormWhite solid
      Quality LevelMQ100
      Applications
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Ship Code Ambient Temperature Only
      Toxicity Standard Handling
      Storage +15°C to +30°C
      Do not freeze Ok to freeze
      Special InstructionsFollowing reconstitution, store in the refrigerator (4°C).
      Packaging Information
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      Bestellnummer GTIN
      391947-100GM 07790788049843

      Documentation

      Hydroxylapatite, Fast Flow SDB

      Titel

      Sicherheitsdatenblatt (SDB) 

      Hydroxylapatite, Fast Flow Analysenzertifikate

      TitelChargennummer
      391947
      Datenblatt

      Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.

      Revision12-May-2008 RFH
      SynonymsHA
      DescriptionA form of calcium phosphate used in preparative procedures for purification of proteins and nucleic acids in which high flow rate and binding capacity are desired (BSA binding capacity: >12 mg/g; DNA binding capacity: >700 µg/g).
      FormWhite solid
      Recommended reaction conditions
      Hydroxylapatite, Fast Flow Protocol Re-hydration: Determine the amount of hydroxylapatite necessary for the intended application. Re-hydrate with 4-6 volumes of starting buffer, such as low ionic strength phosphate buffer, pH >5.5. Gently swirl to thoroughly re-suspend the crystals. Allow the slurry to settle. Decant the excess buffer to approximately give an equal volume of buffer to settled hydroxylapatite. Gently resuspend for a second time in an equal volume of buffer before use. Packing the Column: Close the outlet and half-fill the column with starting buffer. Pour the desired amount of fully suspended hydroxylapatite through an attached filling funnel and allow the suspension to settle. After the hydroxylapatite has stabilized, open the column and pour at lease two bed volumes of starting buffer through the column at the appropriate hydrostatic pressure. Prior to the addition of sample, conductivity, pH, or absorbance of the effluent can be used to confirm column equilibration. Sample Application and Elution: In general, samples are loaded on the hydroxylapatite in low ionic strength phosphate buffers and are eluted with stepwise or gradient concentration increases. The integrity of the column packing and an accurate measure of the void volume can be determined by applying a small amount of low molecular weight sample which does not bind to hydroxylapatite (e.g. 0.01% methyl orange). This will provide a visual check of uniformity as it passes through the column. Regeneration of Hydroxylapatite: High ionic strength phosphate buffer (400-500 mM) is normally sufficient to desorb most material from hydroxylapatite. The use of a high salt solution (1-2 M NaCl), followed by extensive re-equilibration, may help in the removal of contaminants. If necessary, the contaminated top portion of a hydroxylapatite column may be removed, and the column repacked before subsequent use.
      CAS number1306-06-5
      SolubilityPhosphate buffer
      Storage +15°C to +30°C
      Do Not Freeze Ok to freeze
      Special InstructionsFollowing reconstitution, store in the refrigerator (4°C).
      Toxicity Standard Handling
      Merck USA index14, 3467

      Verwandte Produkte & Anwendungen

      Related Products

      Bestellnummer Beschreibung  
      391948 Hydroxylapatite, High Resolution Preis & Verfügbarkeit

      Verwandte Produkte nach: Application Facete

      Kategorien

      Life Science Research > Protein Sample Preparation > Protein Purification > Other Affinity Resins & Kits