MPGL10ZW1
Millipak® Filter
0.22 μm membrane filter. Removes particulates and bacteria from pure water before entering the analyzer. For AFS® systems.
동의어(들):
Millipak® 100 Bacteria Filter
조직 및 계약 가격을 보려면 로그인를 클릭합니다.
크기 선택
제품정보 (DICE 배송 시 비용 별도)
UNSPSC Code:
41104212
NACRES:
JA.14
eCl@ss:
33050190
material
PVDF membrane
sterility
non-sterile
feature
hydrophilic
packaging
pkg of 1 unit
manufacturer/tradename
Millipak®
L
13 cm (5.12 in.)
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤2.5 mg/device
matrix
Durapore®
pore size
0.22 μm pore size
fitting
NPT inlet connection, NPT outlet connection
compatibility
for use with AFS®
shipped in
ambient
Quality Level
유사한 제품을 찾으십니까? 방문 제품 비교 안내
General description
Millipak® membrane products are designed for routine filtration applications in the laboratory. Millipak® filters are best-in-class, proven products, utilized in lab water purification systems to remove particulates and bacteria to benefit the stringent requirements for pure water.
Millipak® 100 Bacteria Filter removes bacteria from pure water before entering the analyzer.
Millipak® 100 Bacteria Filter removes bacteria from pure water before entering the analyzer.
Application
Removes bacteria and particulates in pure water. Suitable for laboratory use, including clinical analyzers. For use with AFS® water purification systems.
Features and Benefits
- Hydrophilic Durapore® PVDF membranes for high flow rates and throughput.
- Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.
- Reduces the risk of microbial contamination.
- Ideally suited for high value-added applications.
- Device Configuration: Capsule
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables: after 24 hours in water at controlled room temperature
Other Notes
0.22 μm Durapore® filter membrane for bacteria removal
Directions for Use
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: General laboratory analysis
- Intended Use: Water purification
- Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Legal Information
AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
국제 무역 품목 번호
| SKU | GTIN |
|---|---|
| MPGL10ZW1 | 08436037122118 |
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.