콘텐츠로 건너뛰기
Merck

VPMD103NB1

Viresolve® Pro Device

Parvovirus removal filter, Modus 1.3 format, filtration area 0.22 m²

동의어(들):

Viresolve® Pro Device Modus 1.3, Viresolve® Pro Device

조직 및 계약 가격을 보려면 로그인를 클릭합니다.

크기 선택

제품정보 (DICE 배송 시 비용 별도)

eCl@ss:
32031690
UNSPSC Code:
23151806

주요 문서

모든 문서 보기
기술 서비스
도움이 필요하신가요? 저희 숙련된 과학자 팀이 도와드리겠습니다.
도움 문의
기술 서비스
도움이 필요하신가요? 저희 숙련된 과학자 팀이 도와드리겠습니다.
도움 문의

제품 이름

Viresolve® ProDevice Modus 1.3, MAX PRESSURE 60 PSI (4.1 bar)

material

PVDF housing
polyethersulfone membrane
silicone gasket

product line

EMPROVE® Filter

manufacturer/tradename

Viresolve®

parameter

60 psig max. inlet pressure

H

13.56 cm (5.34 in.)

L

18.62 cm (7.33 in.)

W

9.22 cm (3.63 in.)

device size

1.3 in.

filtration area

0.22 m2

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

fitting

1/4 in. integrated vent hose barb (with double O-ring seal)
3/4 in. sanitary TC inlet/outlet fitting(s)

Quality Level

400

관련 카테고리

Analysis Note

TOC/Conductivity
After a controlled water flush of 50 L/m², samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.

Disclaimer

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.

Features and Benefits

  • Large scale manufacturing
  • Two different size formats
  • Integrated gaskets
  • Units are stackable in the Viresolve® Pro/Pro+ Magnus Holder (up to 7 units)
  • Alignment keys on each unit to minimize errors during installation
  • Fully disposable single-use fluid path
  • Devices 100% tested with air/water diffusion and Binary Gas Test
  • Shield / Shield H 100% aerosol tested

General description

The Viresolve® Pro Solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Viresolve Pro Modus Devices are typically used for filtration of pilot to mid-scale batch volumes of proteins. The Viresolve® Pro Device Modus 1.3 offers a filtration area of 0.22 m2 and has a primary use in pilot/small-volume processing.

Other Notes

Directions for Use

  • Organism Retention: Parvovirus
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Viral clearance
  • Instructions for Use: Please see the user guide shipped with this product
  • Storage Statement: Store at room temperature
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Preparation Note

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Legal Information

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

국제 무역 품목 번호

SKUGTIN
VPMD103NB104053252720550

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.