콘텐츠로 건너뛰기
Merck

주요 문서

모든 문서 보기

P3B030A10

Pellicon® 3 Cassette with Biomax® Membrane

30kDa, A Screen, 1.14 m2

동의어(들):

Pellicon® 3 Cassette with Biomax 30 kDa Membrane, A screen, 1.14 m2

조직 및 계약 가격을 보려면 로그인를 클릭합니다.

크기 선택

보기 변경

제품정보 (DICE 배송 시 비용 별도)

eCl@ss:
32031623
UNSPSC Code:
23151806
기술 서비스
도움이 필요하신가요? 저희 숙련된 과학자 팀이 도와드리겠습니다.
도움 문의

Quality Segment

400

material

TPE seal, polyethersulfone , polypropylene screen, stainless steel cap (for end; polypropylene-encapsulated)

feature

holdup volume 134 mL (in feed channel)

manufacturer/tradename

Pellicon®

parameter

30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 40 psi max. transmembrane pressure at 4-50 °C, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C

technique(s)

buffer exchange: suitable, protein purification: suitable (concentration)

H

3.91 cm (1.54 in.)

L

20.6 cm (8.1 in.)

W

17.8 cm (7 in.)

membrane area

1.14 m2

gravimetric extractables

≤1500 mg/m2

matrix

Biomax® (Membrane)

pore size

30 kDa NMWCO

pH

1-14

General description

Pellicon® 3 filtration devices are advanced, high-performance cassettes ideal for today’s higher titer therapeutic antibodies as well as the more demanding filtration processes that require higher operating pressures, temperatures and caustic cleaning regimes.

The Pellicon® 3 Cassette with Biomax® Membrane is perfect for the filtration of monoclonal antibodies and solutions containing albumin, hormones, vaccines and growth factors.

This P3B030A10 Pellicon® 3 ultrafiltration device features a pore size of 30 kDa NMWCO, a Biomax® 30 membrane, and dimensions measuring 3.91 cm (H) x 17.8 cm (W) x 20.6 cm (L).

Features and Benefits

  • Rugged & reliable – ideally suited for today′s more demanding filtration processes
  • High performance – produces excellent resolution, yields and back-pressure resistance
  • Optimum product recovery – thanks to proven membrane technology
  • Void-free technology – leading-edge membranes resolve virtually any separation challenge
  • Defect-free, superior adhesion – Ultracel®uses composite membranes cast on a microporous substrate
  • Automated manufacturing – delivers unbeatable performance, consistency and reliability
  • Easy installation & care – simple to install and maintain

Analysis Note

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Other Notes

These products are manufactured in a facility which adheres to Good Manufacturing Practices.

Legal Information

BIOMAX is a registered trademark of Merck KGaA, Darmstadt, Germany
Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany
ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under Pellicon® 3 Cassette with Biomax® Membrane

저장 등급

12 - Non Combustible Liquids

flash_point_f

Not applicable

flash_point_c

Not applicable

Emprove® 프로그램을 사용하여 GMP 준수 유지

Emprove® Dossiers로 자격을 가속화하고, 규정 준수를 유지하며, 시간을 절약하세요.

Dossiers 다운로드

주: EmproveSuite.com으로 이동하게 됩니다. 귀하의 사용자 이름과 비밀번호는 시그마알드리치닷컴과는 별개이며 다를 수 있습니다.

무료로 등록하고 몇 분 안에 Emprove® Dossiers에 액세스하세요. 구독 플랜을 업그레이드하여 Emprove® Suite에서 고급 및 맞춤형 콘텐츠를 잠금 해제하세요.

원하는 정보를 찾지 못하셨나요? Emprove® 프로그램 도움말 페이지 방문하기.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문