콘텐츠로 건너뛰기
Merck

주요 문서

모든 문서 보기

MPGL20CB3

Millipak® 200 Capsule Media: Durapore® 0.22 µm

Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. NPT Outlet: 1/4 in. NPT

동의어(들):

Gamma Compatible Millipak -200 Filter Unit 0.22 μm 1/4 in. NPTM, Durapore® 0.22 µm, Millipak® Capsule

조직 및 계약 가격을 보려면 로그인를 클릭합니다.

크기 선택

보기 변경

제품정보 (DICE 배송 시 비용 별도)

UNSPSC Code:
23151806
기술 서비스
도움이 필요하신가요? 저희 숙련된 과학자 팀이 도와드리겠습니다.
도움 문의

제품 이름

Millipak® 200 Capsule Media: Durapore® 0.22 µm, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. NPT Outlet: 1/4 in. NPT

Quality Segment

400

material

PVDF vent cap, polycarbonate support, PVDF membrane, polycarbonate housing

sterility

non-sterile

sterilization compatibility

gamma compatible
x-ray compatible

product line

Millipak®

feature

hydrophilic

manufacturer/tradename

Durapore®

parameter

0.35 bar max. differential pressure (5 psid) at 123 °C (Forward), 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward)

technique(s)

sterile filtration: suitable

filter diam.

7.6 cm (3.0 in.)

filtration area

1000 cm2

inlet connection diam.

1/4 in.

outlet connection diam.

1/4 in.

impurities

<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤5 mg/device

matrix

Durapore®

pore size

0.22 μm

bubble point

≥3450 mbar (50 psig), air with water at 23 °C

fitting

6 mm (1/4 in.) NPT inlet connection, 6 mm (1/4 in.) NPT outlet connection

General description

Device Configuration: Capsule
Number of stacked discs: 200 discs

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method
3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables: after 24 hours in water at controlled room temperature
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL

Other Notes

Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under Millipak® 200 Capsule Media: Durapore® 0.22 µm

Emprove® 프로그램을 사용하여 GMP 준수 유지

Emprove® Dossiers로 자격을 가속화하고, 규정 준수를 유지하며, 시간을 절약하세요.

Dossiers 다운로드

주: EmproveSuite.com으로 이동하게 됩니다. 귀하의 사용자 이름과 비밀번호는 시그마알드리치닷컴과는 별개이며 다를 수 있습니다.

무료로 등록하고 몇 분 안에 Emprove® Dossiers에 액세스하세요. 구독 플랜을 업그레이드하여 Emprove® Suite에서 고급 및 맞춤형 콘텐츠를 잠금 해제하세요.

원하는 정보를 찾지 못하셨나요? Emprove® 프로그램 도움말 페이지 방문하기.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문