Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
この品目はお気に入りに追加されました。
動物種
パネルタイプ
選択したキット
数量
カタログ番号
注文内容
Qty/Pk
価格
96-Well Plate
数量
カタログ番号
注文内容
Qty/Pk
価格
その他の試薬を追加 (MAPmatesとともに使用するにはバッファーおよび検出キットが必要です)
数量
カタログ番号
注文内容
Qty/Pk
価格
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
Space Saver Option(チェックを入れると箱詰めから袋詰めに変更となりますのでご注意ください) Customers purchasing multiple kits may choose to save storage space by eliminating the kit packaging and receiving their multiplex assay components in plastic bags for more compact storage.
Water may be used to rinse the sample containers, in the various sample preparation steps, as well as in the preparation of standards and blanks for the analysis. Gas chromatography (GC) using purge and trap is often used for these analyses.
The following water contaminants may interfere with VOC analysis:
Organics Organic molecules, in particular volatile organics (VOC) present in the water used to prepare or analyze the samples may interfere with VOC analysis by contributing a high background and possibly affecting selectivity and sensitivity.
Chlorine Some VOCs, in particular aromatic compounds, may react and be degraded by chlorine.
Bacteria Bacteria may degrade some VOCs and should therefore be avoided. They may also release some small organics that may interfere with VOC analysis.
Preparing VOC-free water using an activated carbon point-of-use purifier
Ultrapure water was spiked with various VOCs at a concentration of approximately 1 ppb (1 µg/L). The water was passed through a specific activated carbon cartridge (VOC-Pak®) and the concentration of each VOC was measured at the outlet of the cartridge. The VOC analysis was performed using a Purge & Trap GC-MS system. The results are shown here.
Conclusion
Ultrapure water should be used for VOC analysis. Using the VOC-Pak® cartridge at the point of use of the water purification system (producing water with a resistivity of 18.2 MΩ.cm at 25 °C and TOC < 5 ppb) can ensure that the VOCs listed in the table are below the analytical quantification limits listed.