Millipore Sigma Vibrant Logo

加圧容器、600 mL

For dispensing volumes up to 600 mL

関連資料

概要

仕様

ご注文情報

加圧容器、600 mL並べ替えとフィルターをクリアする Show Filter
カタログ番号説明パッケージ
XX1100000600 mL 加圧容器 1 価格&在庫状況を表示

トップに戻る

アクセサリー並べ替えとフィルターをクリアする Show Filter
カタログ番号説明パッケージ
SX0004700スウィネクス(Swinnex)フィルターホルダー, 47 mm 8 価格&在庫状況を表示

トップに戻る

Documentation

FAQ(よくある質問と回答)

質問回答
Can I filter hot liquids in my pressure vessel?NOTE: This technique is not recommended for any potentially combustible solvents. Care should be taken before proceeding.

In addition to being autoclavable, the pressure vessel can also be heated before and during filtrations. We have heated the unit to as high as 90C while in use. We have filtered liquids with the entire pressure vessel and filtration apparatus in an oven, have put the vessel into hot water baths, and have used a hot plate. The hot plate did not provide good heat distribution and the rubber bottom burned slightly under the direct heat contact, but this method could still be used in a pinch. In our experience we found that heating in the oven was the best choice with the water bath a close second. Of course, before doing this it is important that you check
1) the compatibility of your liquid with the o-rings and stainless steel under elevated temperatures, and
2) the flammability/volatility of your liquid being filtered. This technique is not recommended for any potentially combustible solvents. One example of a potentially combustible solvent is Isopropanol.