Millipore Sigma Vibrant Logo

KVEPS015FH3 Opticap® Sterile XL 150 Millipore Express® SHR single layer 0.1 µm 3/4 in TC-9/16 in. HB

Opticap® Sterile XL 150 Millipore Express® SHR single layer 0.1 µm 3/4 in TC-9/16 in. HB: のSDS（安全データシート）、CoA（試験成績書）およびCoQ（品質証明書）、カタログなど製品関連の技術資料を入手いただけます。
View This Product on Sigma-Aldrich
KVEPS015FH3
3  Double Easy-Open bag
価格を検索中…
価格が見つかりません
Minimum Quantity needs to be mulitiple of
Maximum Quantity is
弊社照会 詳細を表示　
値引
()
 
—
弊社照会
—
現在国内在庫なし 現在国内在庫なし
現在国内在庫有り 
販売中止
在庫僅少
現在国内在庫あり
    Remaining : Will advise
      Remaining : Will advise
      注文対象外
      お問合せください
      Contact Customer Service

       

      お問合せください

      概要

      Replacement Information
      Description
      Catalogue NumberKVEPS015FH3
      Trade Name
      • Millipore Express®
      DescriptionOpticap® Sterile XL 150 Millipore Express® SHR single layer 0.1 µm 3/4 in TC-9/16 in. HB
      References
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange/14 mm (9/16 in.) Hose Barb
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)6.9 bar (100 psi) intermittent @ 23 °C; 5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Quality LevelMQ400
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaMillipore Express® SHR
      SterilitySterile
      Sterilization3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.1 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionHose Barb
      Air Diffusion at 23 °C≤1.4 mL/min @ 3.45 bar (50 psig) in water
      Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Differential Pressure80 psi (5.5 bar) continuous
      100 psi (6.9 bar) intermittent
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 2.0 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length3.8 in. (9.7 cm)
      Length9.7 cm (3.8 in.)
      Diameter5.6 cm (2.2 in.)
      Filtration Area250 cm²
      Inlet to Outlet Width9.7 cm (3.8 in.)
      Inlet Connection Diameter3/4 in.
      Outlet Connection Diameter9/16 in.
      Materials Information
      Chemistry
      • Polyethersulfone (PES)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size3
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
      Global Trade Item Number
      カタログ番号 GTIN
      KVEPS015FH3 04053252659119

      Documentation

      Material Qualification Dossier

      タイトルバージョン
      6.0

      Operational Excellence Dossier

      Title

      技術情報

      タイトル
      Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
      Performance of High-Area Millipore Express®Cartridge Filters
      Scalable Process Filtration with Millipore Express® SHR 0.1 μm Filters

      データシート

      タイトル
      Millipore Express®SHR Hydrophilic Filters

      ユーザーガイド

      タイトル
      Opticap® XL Capsules and Opticap® XLT Capsules
      User Guide - Filters with Millipore Express®Membrane

      関連製品＆アプリケーション

      製品ファミリー

      オプティキャップ（Opticap）XL及びXLTディスポーザブルカプセルフィルター　ミリポアエクスプレス（Millipore Express）SHR親水性メンブレン

      Millipore Express® SHR (Sterile High-retention) devices provide sterilizing-grade performance and mycoplasma removal across a range of bioprocess solutions.
      詳細はこちら >>

      関連製品: Brand Facete

      Opticap®

      カテゴリー

      Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Millipore Express® > Millipore Express® SHR