Millipore Sigma Vibrant Logo

391947 Hydroxylapatite, Fast Flow

Hydroxylapatite, Fast Flow: のSDS（安全データシート）、CoA（試験成績書）およびCoQ（品質証明書）、カタログなど製品関連の技術資料を入手いただけます。

同義語: HA

View This Product on Sigma-Aldrich
391947
価格＆在庫状況を照会

概要

Replacement Information

価格＆在庫状況

カタログ番号 在庫状況包装 Qty/Pk 価格 数量
391947-100GMCN
在庫状況検索中…
—
現在国内在庫なし 現在国内在庫なし
現在国内在庫有り 
販売中止
在庫僅少
現在国内在庫あり
    Remaining : Will advise
      Remaining : Will advise
      注文対象外
      お問合せください
      Contact Customer Service

      		 ｶﾞﾗｽﾋﾞﾝ 100 gm
      価格を検索中…
      価格が見つかりません
      Minimum Quantity needs to be mulitiple of
      Maximum Quantity is
      弊社照会 詳細を表示　
      値引
      ()
       
      —
      弊社照会
      		 —
      Description
      OverviewA form of calcium phosphate used in preparative procedures for purification of proteins and nucleic acids in which high flow rate and binding capacity are desired. BSA binding capacity: >12 mg/g; DNA binding capacity: >700 µg/g.
      Catalogue Number391947
      Brand Family Calbiochem®
      SynonymsHA
      References
      Product Information
      CAS number1306-06-5
      FormWhite solid
      Quality LevelMQ100
      Applications
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Ship Code Ambient Temperature Only
      Toxicity Standard Handling
      Storage +15°C to +30°C
      Do not freeze Ok to freeze
      Special InstructionsFollowing reconstitution, store in the refrigerator (4°C).
      Packaging Information
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      カタログ番号 GTIN
      391947-100GMCN 07790788049843

      Documentation

      Hydroxylapatite, Fast Flow (M)SDS

      タイトル

      英語版製品安全データシート（(M)SDS） 

      Hydroxylapatite, Fast Flow 試験成績書（CoA）

      タイトルロット番号
      391947
      データシート

      Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.

      Revision12-May-2008 RFH
      SynonymsHA
      DescriptionA form of calcium phosphate used in preparative procedures for purification of proteins and nucleic acids in which high flow rate and binding capacity are desired (BSA binding capacity: >12 mg/g; DNA binding capacity: >700 µg/g).
      FormWhite solid
      Recommended reaction conditions
      Hydroxylapatite, Fast Flow Protocol Re-hydration: Determine the amount of hydroxylapatite necessary for the intended application. Re-hydrate with 4-6 volumes of starting buffer, such as low ionic strength phosphate buffer, pH >5.5. Gently swirl to thoroughly re-suspend the crystals. Allow the slurry to settle. Decant the excess buffer to approximately give an equal volume of buffer to settled hydroxylapatite. Gently resuspend for a second time in an equal volume of buffer before use. Packing the Column: Close the outlet and half-fill the column with starting buffer. Pour the desired amount of fully suspended hydroxylapatite through an attached filling funnel and allow the suspension to settle. After the hydroxylapatite has stabilized, open the column and pour at lease two bed volumes of starting buffer through the column at the appropriate hydrostatic pressure. Prior to the addition of sample, conductivity, pH, or absorbance of the effluent can be used to confirm column equilibration. Sample Application and Elution: In general, samples are loaded on the hydroxylapatite in low ionic strength phosphate buffers and are eluted with stepwise or gradient concentration increases. The integrity of the column packing and an accurate measure of the void volume can be determined by applying a small amount of low molecular weight sample which does not bind to hydroxylapatite (e.g. 0.01% methyl orange). This will provide a visual check of uniformity as it passes through the column. Regeneration of Hydroxylapatite: High ionic strength phosphate buffer (400-500 mM) is normally sufficient to desorb most material from hydroxylapatite. The use of a high salt solution (1-2 M NaCl), followed by extensive re-equilibration, may help in the removal of contaminants. If necessary, the contaminated top portion of a hydroxylapatite column may be removed, and the column repacked before subsequent use.
      CAS number1306-06-5
      SolubilityPhosphate buffer
      Storage +15°C to +30°C
      Do Not Freeze Ok to freeze
      Special InstructionsFollowing reconstitution, store in the refrigerator (4°C).
      Toxicity Standard Handling
      Merck USA index14, 3467