Millipore Sigma Vibrant Logo

KHGEG1TTT1H Gamma Compatible High Area Opticap® XLT 10 Millipore Express® SHC 0.5  µm/0.2 µm 1-1/2 in. TC

Gamma Compatible High Area Opticap® XLT 10 Millipore Express® SHC 0.5  µm/0.2 µm 1-1/2 in. TC: のSDS（安全データシート）、CoA（試験成績書）およびCoQ（品質証明書）、カタログなど製品関連の技術資料を入手いただけます。
View This Product on Sigma-Aldrich
KHGEG1TTT1H
1  Double Easy-Open bag
価格を検索中…
価格が見つかりません
Minimum Quantity needs to be mulitiple of
Maximum Quantity is
弊社照会 詳細を表示　
値引
()
 
—
弊社照会
—
現在国内在庫なし 現在国内在庫なし
現在国内在庫有り 
販売中止
在庫僅少
現在国内在庫あり
    Remaining : Will advise
      Remaining : Will advise
      注文対象外
      お問合せください
      Contact Customer Service

       

      お問合せください

      概要

      Replacement Information
      Description
      Catalogue NumberKHGEG1TTT1H
      Trade Name
      • Millipore Express®
      DescriptionGamma Compatible High Area Opticap® XLT 10 Millipore Express® SHC 0.5  µm/0.2 µm 1-1/2 in. TC
      OverviewFamily (FID): Express (FID19B),
      Organism Retention: Microorganism
      Mode of Action: Filtration (size exclusion)
      Application: BioProcessing
      Intended Use: Reduction or removal of microorganism/bioburden
      Instructions for Use: Please refer installation section of Opticap® XL Capsules and Opticap® XLT Capsules User Guide.
      Storage Statement: Store in dry location.
      Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations.
      Label statement: Directions for use refer to website.
      Label statement: Directions for Use refer Opticap® XL Capsules and Opticap® XLT Capsules User Guide on website (custom product only).
      References
      Product Information
      HS Code8421 22 00
      Connections, Inlet/Outlet38 mm (1-1/2 in.) Sanitary Flange
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line
      Quality LevelMQ400
      Applications
      Key Applications
      • Laboratory Filtration
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      SterilityNon-sterile, Gamma compatible
      SterilizationGamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.5 / 0.2 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionSanitary Flange
      Air Diffusion at 23 °C≤56.4 mL/min @ 2.75 bar (40 psig) in water
      Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80
      Maximum Inlet Temperature25°C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 21 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      Dimensions
      Cartridge Nominal Length10 in. (25 cm)
      Length37.6 cm (14.8 in.)
      Diameter10.7 in. (4.2 cm)
      Filtration Area10000 cm2
      Inlet to Outlet Width15.2 cm (6.0 in.)
      Device Size10 in.
      Outlet Connection Diameter1.5 in.
      Materials Information
      Chemistry
      • Hydrophilic Polyethersulfone (PES)
      Device Material
      • Polypropylene/Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L
      Global Trade Item Number
      カタログ番号 GTIN
      KHGEG1TTT1H 04054839167850

      Documentation

      Material Qualification Dossier

      タイトルバージョン
      1.0

      Operational Excellence Dossier

      Title

      品質証明書

      タイトル
      OPTICAP XLT 10 Capsule Millipore Express SHC High area membrane C3MB59358
      Opticap XL 10 Capsule Millipore Express SHC High Area Membrane C0PB26227
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C0JB89740
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C3HB20003
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C9AA44665
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8BA06644
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8DA35233
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8JA78864
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C9HA44480
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C1HB80684
      Show more

      技術情報

      タイトル
      Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
      Extended bacterial retention testing of Millipore Express® 0.2 μm filters in a continuous flow system
      Simplified, efficient sizing of sterilizing-grade normal flow filters for buffer solutions

      データシート

      タイトル
      Millipore Express® SHC 親水性フィルター
      Millipore Express®SHC Hydrophilic Filters

      ユーザーガイド

      タイトル
      User Guide - Filters with Millipore Express®Membrane

      関連製品＆アプリケーション

      製品ファミリー

      Millipore Express® SHC 0.5/0.2 μm Capsule Filters

      Millipore Express® SHC (Sterilizing-grade High Capacity) devices offer high performance and superior economics in a wide variety of sterilizing-grade filtration applications.
      詳細はこちら >>

      関連製品: Brand Facete

      Opticap®

      カテゴリー

      Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Millipore Express® > Millipore Express® SHC