Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
この品目はお気に入りに追加されました。
動物種
パネルタイプ
選択したキット
数量
カタログ番号
注文内容
Qty/Pk
価格
96-Well Plate
数量
カタログ番号
注文内容
Qty/Pk
価格
その他の試薬を追加 （MAPmatesとともに使用するにはバッファーおよび検出キットが必要です）
数量
カタログ番号
注文内容
Qty/Pk
価格
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
Space Saver Option（チェックを入れると箱詰めから袋詰めに変更となりますのでご注意ください） Customers purchasing multiple kits may choose to save storage space by eliminating the kit packaging and receiving their multiplex assay components in plastic bags for more compact storage.
C73374Cost-effective solution for analyzers with degassed pure water needs of up to 320 Liters daily
CLRW quality
AFS® D Systems provide a cost-effective, low maintenance water purification solution for analyzers with degassed pure water needs up to 320 L daily. AFS® D systems combine complementary water purification techniques; Complete pretreatment, advanced reverse osmosis (RO), Q-Gard® polishing pack, exposure to a bactericidal UV lamp, degassing, and final 0.22 µm filtration ensure a reliable and consistent water quality. Water produced by the systems complies with the Clinical and Laboratory Standards Institute® (CLSI) guideline for clinical laboratory reagent water (CLRW). Depending on daily volume needs, different production flow rates are available (8 and 16 L/h).
The systems are designed to fulfill accreditation needs (such as CAP™ 15189 accreditation to the ISO® 15189:2007 standard), and have full monitoring and water quality archiving capabilities that allow storage of up to six months of data. Activation of Millitrack® Essential e-Solution allows easy, rapid access to this information and also enhances data management control and provides remote system access.
User friendly & easy maintenance
Robust AFS® D systems require little maintenance, which means less analyzer downtime. Systems have a small footprint and can be installed wherever it is convenient in the laboratory: on a wall, on or under the bench, or on a cart. AFS® D systems are customizable with a wide range of options and accessories, including reservoirs, a sanitization kit and an aeration kit. Optimized lifetimes for the systems’ pretreatment and polishing packs, as well as low feed water consumption make AFS® D systems a cost-effective choice.
Water Specifications
AFS® D Essential CLRW water (CLSI Clinical Laboratory Reagent Water)
Resistivity at 25 °C
> 15 MΩ•cm
TOC
Typically < 30 ppb
Bacteria
< 1 CFU/mL
Silica
< 5 µg/L
Dissolved oxygen
Typically 6 - 8 ppm
System
Permeate Flow Rate
Peak Dispense Rate (to atmosphere)
Dispensing pressure to analyzer
AFS® 8D
8 L/h
Up to 0.6 L/min*
1 bar ± 10 % (13-16 psi)*
AFS® 16D
16 L/h
Up to 0.6 L/min*
1 bar ± 10 % (13-16 psi)*
* Dispensing to atmosphere (without any flow restriction due to the analyzer)
Feed water
Feed water quality
Potable
Feed water pressure
1 - 6 bar
Feed water temperature
5 - 35 °C
Minimum flow rate feed
> 5 L min at 2 bar
Total chlorine *
< 3 ppm
Langelier Saturation Index
< 0.3
Maximum Fouling Index (SDI)
< 12
Tap water connection
½” Gaz M
* For feed water with total chlorine concentration between 1 ppm and 3 ppm, Merck Millipore suggests the use of an external PrePak.
System Specifications
Dimensions (H x W x D)
470 x 268 x 426 mm (18.5 x 10.6 x 16.8 in)
Operating weight
< 22.2 kg (49 lb)
Electric power supply voltage
100 - 240 V +/- 10%
Electric power supply frequency
50 - 60 Hz +/- 10%
Power consumption
200 W or 250 VA
AFS® D main unit data connection
Ethernet (RJ45)
Safety
The AFS® D system is tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The AFS® D system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site ( http://www.ul.com).
