Millipore Sigma Vibrant Logo

KPGEG2THH1 Opticap® XLT 20 Millipore Express® PHF Gamma Compatible 0.2 µm 5/8 in. HB

Opticap® XLT 20 Millipore Express® PHF Gamma Compatible 0.2 µm 5/8 in. HB MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View This Product on Sigma-Aldrich
KPGEG2THH1
1  Double Easy-Open bag
Price could not be retrieved
Minimum Quantity is a multiple of
Maximum Quantity is
Upon Order Completion More Information
You Saved ()
 
—
Request Pricing
—
Limited Availability Limited Availability
In Stock 
Discontinued
Limited Quantities Available
Availability to be confirmed
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service

       

      Contact Customer Service

      Overview

      Description
      Catalogue NumberKPGEG2THH1
      Trade Name
      • Millipore Express®
      DescriptionOpticap® XLT 20 Millipore Express® PHF Gamma Compatible 0.2 µm 5/8 in. HB
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
      Housing MaterialPolypropylene (PP)
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line
      Quality LevelMQ400
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaMillipore Express® PHF
      SterilityGamma
      SterilizationGamma compatible to 40 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
      Bacterial RetentionSamples of membrane used in this filter were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.2 µm
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Air Diffusion at 23 °C≤65.5 mL/min @ 2.8 bar (40 psig) in water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Differential Pressure5500 mbar (80 psi) @ 25 °C; 1000 bar (15 psi) @ 80 °C
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 22 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length20 in. (50 cm)
      Length62.5 cm (24.6 in.)
      Diameter10.7 cm (4.2 in.)
      Filtration Area1.14 m²
      Inlet to Outlet Width19.8 cm (7.8 in.)
      Device Size20 in.
      Inlet Connection Diameter5/8 in.
      Outlet Connection Diameter5/8 in.
      Materials Information
      Chemistry
      • Polyethersulfone (PES)
      Device Material
      • Gamma stable polypropylene/Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L
      Global Trade Item Number
      Catalogue Number GTIN
      KPGEG2THH1 04055977295276