Millipore Sigma Vibrant Logo
Attenzione: Ci siamo trasferiti. Non è più possibile acquistare i prodotti Merck Millipore nel sito MerckMillipore.comPer saperne di più

AP4003705 Filtri in fibra di vetro senza legante, AP40, 37 mm

0.7 µm pore size, hydrophilic glass fiber, 37 mm diameter

Filtri in fibra di vetro senza legante, AP40, 37 mm: MSDS (material safety data sheet) o SDS, certificato d’analisi (CoA) e certificato di qualità (CoQ), dossier, brochure e altri documenti disponibili.
AP4003705
500  
Purchase on Sigma-Aldrich

Panoramica

Replacement Information
Descrizione
Numero di catalogoAP4003705
DescrizioneFiltri in fibra di vetro senza legante, AP40, 37 mm
Informazioni di baseOverview
Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

Glass Fiber Filters with Binder Resin:
Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

Type AP15
•Lowest dirt-holding capacity
•Recommended prefilter for 0.2 to 0.6 µm filters

Type AP20
•Lower retention, higher dirt-holding capacity than AP15 filters
•Recommended prefilter for 0.8 to 8.0 µm filters
•Use upstream to protect type AP15 filters

Type AP25
•Added thickness yields same retention and greater dirt-holding capacity as AP20
•Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
•Use upstream to protect type AP15 filters

Glass Fiber Filters without Binder Resin:
The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Type APFA
•Retains fine particles with good efficiency, even at high flow rates
•Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
•Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

Type APFB
•Higher mechanical strength when wet and greater loading capacity than type APFA filters
•Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

Type APFC
•Greater retention, especially for fine particulate and microorganism removal than type APFA filters
•Use for determining total suspended solids in drinking water
•Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

Type APFD
•Thick filter with high flow and low retention
•Use for clarifying suspensions containing particulates greater than 1.0 µm

Type APFF
•Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
•Recommended for USEPA method 1311 for TCLP analysis

Type AP40
•Recommended for Standard Methods Total Suspended Solids 2540D
•Recommended for USEPA method 1311 for TCLP analysis
•Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
•Recommended for determining volatile suspended matter in wastewater and industrial effluents
Riferimenti bibliografici
Informazioni sul prodotto
Codice HS7019 90 00
Codice del filtroAP40
Colore del filtroBianco
Temperatura d'esercizio massima550 °C
Tipo di filtroFiltro di profondità
Applicazioni
Applicazione0.7 µm pore size, hydrophilic glass fiber, 37 mm diameter
Contaminant of Interest
  • 2,4,5-T, 2,4-D
  • Carbaryl
  • Pyrethrum
  • EPN
  • Malathion
  • Parathion
  • Chlorinated terphynl (60% chlorine)
  • Chrlorinated Triphenyl
  • Polychloroterphynl
  • PCT
  • Aroclor 5460
  • Strychnine, Strychnidin-10-one
  • Oil Mist of White Mineral Oil
  • Water-Insoluble Petroleum-based Cutting Oils
  • Cable Oil
  • Cutting Oil
  • Drawing Oil
  • Engine Oil
  • Heat-Treating Oils
  • Hydraulic Oils
  • Machine Oil
  • Transformer Oil
  • Ribavirin, Virazole, ICN 1229
  • Aldrin (Octalene, Aldrite, Aldrosol, HHDN)
  • Organotin Compounds (as Sn)
Regulated Test Method Number
  • NIOSH 5001
  • NIOSH 5006
  • NIOSH 5008
  • NIOSH 5012
  • NIOSH 5014
  • NIOSH 5016
  • NIOSH 5026
  • NIOSH 5027
  • NIOSH 5502
  • NIOSH 5503
Informazioni biologiche
BagnabilitàIdrofilo
Informazioni chimico-fisiche
Dimensioni dei pori0.7 µm
Porosità %90%
Portata d'acqua
  • >300 (mL/min x cm²) at 27 in Hg
Dimensioni
Superficie del filtroPiana
Spessore475 µm
Diametro del filtro (⌀)37 mm
Informazioni sui materiali
Chimica
  • Fibre di vetro
Informazioni tossicologiche
Informazioni sulla sicurezza secondo il GHS
Informazioni per la sicurezza
Indicazioni sull'impiego del prodotto
Informazioni per lo stoccaggio e la spedizione
Informazioni sul confezionamento
Quantità500
Informazioni per il trasporto
Informazioni supplementari
Specifiche
Global Trade Item Number
Numero di catalogo GTIN
AP4003705 04053252730870