Millipore Sigma Vibrant Logo

QIA125 Urokinase Activity Assay Kit, Fluorogenic

Urokinase Activity Assay Kit, Fluorogenic : FDS (Fiches de données de sécurité), certificats d’analyse (CoA) et de qualité (CoQ), dossiers, brochures et autres documents disponibles.

Synonymes: uPA Activity Assay Kit, Fluorogenic, Urokinase-Type Plasminogen Activator Activity Assay Kit, Fluorogenic

QIA125
  
Prix en cours de récupération
Le prix n'a pas pu être récupéré
La quantité minimale doit être un multiple de
Maximum Quantity is
À la validation de la commande Plus d'informations
Vous avez sauvegardé ()
 
—
Demander le prix
—
Disponibilité limitée Disponibilité limitée
En stock 
Interrompu(e)
Disponible en quantités limitées
Disponibilité à confirmer
    Pour le restant : Nous vous tiendrons informé
      Pour le restant : Nous vous tiendrons informé
      Nous vous tiendrons informé
      Contacter le Service Clients
      Contact Customer Service

       

      Contacter le Service Clients

      Aperçu

      Replacement Information

      Tableau de caractéristiques principal

      Detection Methods
      Fluorometric
      Description
      Overview

      This product has been discontinued.





      A sensitive fluorogenic assay for the measurement of urokinase activity (Excitation: ~360-380 nm; Emission: ~430-460 nm). Altered activity of urokinase has been implicated in several physiological and pathological processes including inflammation, angiogenesis, tissue remodeling, and tumor metastasis.
      Catalogue NumberQIA125
      Brand Family Calbiochem®
      SynonymsuPA Activity Assay Kit, Fluorogenic, Urokinase-Type Plasminogen Activator Activity Assay Kit, Fluorogenic
      Materials Required but Not Delivered• Pipetman or multi-channel pipetman; use only pipettes that are carefully calibrated to their target volume.
      • Microplate reader capable of measuring fluorescence at wavelengths of 360-380 nm (excitation) and 430-460 nm (emission).
      • 37°C incubator
      • Ice bucket to keep reagents cold until use.
      References
      ReferencesMeuhlenweg, B., et al. 2001. Expert Opin. Biol. Ther. 1, 683.
      Dano, K., et al. 1994. Fibrinolysis 8 (supp. 1), 189.
      Dano, K., et al. 1985. Adv. Cancer Res. 44, 139
      Morita, T., et al. 1977. J. Biochem. 82, 1495.
      Johnson, A.J., et al. 1969. Thromb. Diath. Haemorrh. 21, 259.
      Product Information
      Detection methodFluorometric
      DeclarationCalbiochem® is a registered trademark of EMD Chemicals, Inc. CytoBuster™ and Interactive Pathways™ are trademarks of EMD Chemicals, Inc.
      Form100 Tests
      Format96-well plate
      Kit containsUrokinase Standard, Substrate, Assay Buffer, Dilution Buffer, Microplate, Plate Sealer, Cell Lysis Buffer, and a user protocol.
      Positive controlUrokinase
      Quality LevelMQ100
      Applications
      Biological Information
      Assay range0.78 - 50 U/ml
      Assay time1.5 h
      Sample TypeCell lysates, plasma, and serum, for screening uPA inhibitors
      Physicochemical Information
      Sensitivity0.01 U/ml
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Intended useThis Calbiochem® Urokinase Activity Assay Kit is a sensitive fluorogenic assay for the measurement of urokinase activity (excitation: 360-380 nm; emission: 430-460 nm) in cell lysates, plasma, and serum, as well as for the screening of urokinase inhibitors.
      Storage and Shipping Information
      Ship Code Dry Ice Only
      Toxicity Multiple Toxicity Values, refer to MSDS
      Storage Multiple storage requirements
      Storage ConditionsStore unopened kit at -20°C, urokinase standard at -70°C. Once opened, kit components can be stored as follows: microplate and cell lysis buffer at room temperature; dilution buffer, assay buffer, and urokinase substrate at 4°C: and urokinase standard at -70°C. Upon reconstitution of urokinase standard, aliquot and freeze at -70°C to avoid freeze/thaw cycles.
      Protect from Light Protect from light
      Avoid freeze/thaw Avoid freeze/thaw
      Do not freeze Ok to freeze
      Packaging Information
      Transport Information
      Supplemental Information
      Kit containsUrokinase Standard, Substrate, Assay Buffer, Dilution Buffer, Microplate, Plate Sealer, Cell Lysis Buffer, and a user protocol.
      Specifications
      Global Trade Item Number
      Référence GTIN
      QIA125 0

      Documentation

      Urokinase Activity Assay Kit, Fluorogenic Certificats d'analyse

      TitreNuméro de lot
      QIA125

      Références bibliographiques

      Aperçu de la référence bibliographique
      Meuhlenweg, B., et al. 2001. Expert Opin. Biol. Ther. 1, 683.
      Dano, K., et al. 1994. Fibrinolysis 8 (supp. 1), 189.
      Dano, K., et al. 1985. Adv. Cancer Res. 44, 139
      Morita, T., et al. 1977. J. Biochem. 82, 1495.
      Johnson, A.J., et al. 1969. Thromb. Diath. Haemorrh. 21, 259.

      Brochure

      Titre
      Kit SourceBook - 2nd Edition EURO
      Kits SourceBook - 2nd Edition GBP
      Protocole Utilisateur

      Revision07-November-2008 RFH
      SynonymsuPA Activity Assay Kit, Fluorogenic, Urokinase-Type Plasminogen Activator Activity Assay Kit, Fluorogenic
      Form100 Tests
      Format96-well plate
      Detection methodFluorometric
      Specieshuman
      StorageStore unopened kit at -20°C, urokinase standard at -70°C. Once opened, kit components can be stored as follows: microplate and cell lysis buffer at room temperature; dilution buffer, assay buffer, and urokinase substrate at 4°C: and urokinase standard at -70°C. Upon reconstitution of urokinase standard, aliquot and freeze at -70°C to avoid freeze/thaw cycles.
      Intended useThis Calbiochem® Urokinase Activity Assay Kit is a sensitive fluorogenic assay for the measurement of urokinase activity (excitation: 360-380 nm; emission: 430-460 nm) in cell lysates, plasma, and serum, as well as for the screening of urokinase inhibitors.
      BackgroundUrokinase or urokinase-type plasminogen activator (uPA) has been implicated in many physiological and pathological processes including cancer invasion and metastasis. The involvement of uPA in the degradation of extracellular matrix components by the generation of pericellular proteolytic activity is important in tissue remodeling and repair, and in invasive cell migration (1, 2, 3). uPA is a 54 kDa serine protease with an extremely limited substrate specificity, cleaving the Cys-Pro-Gly-Arg560⊥Val561-Val-Gly-Gly-Cys that constitutes a small disulfide-bridged loop in plasminogen. Synthetic peptide substrates based on this sequence like Glutaryl-Gly-Arg AMC are widely used to determine urokinase activity.
      Principles of the assayThis assay is designed for the quantitative in vitro determination of urokinase activity in microplates. It utilizes the unique ability of urokinase to digest the synthetic substrate Glutaryl-Gly-Arg AMC. Released free AMC is determined fluorometrically at excitation 360-380 nm and emission 440-460 nm. The activity of the urokinase can be quantified with a urokinase standard, or can be displayed as RFUnits. For the urokinase standard, 1 unit is defined as the amount of enzyme equal to an international standard as tested by the fibrinolytic method. The kit provides all of the components required to perform the assay.
      Materials provided• Urokinase Standard (Kit Component No. JA7680-20U): 1 vial, 20 units, human urokinase (Cat. No. 672112), liquid (Note: 1 unit = 1CTA = 0.7 Ploug units)
      • Substrate (Kit Component No. JA7681-100UL): 1 vial, 100 µl, 100X concentrated Glutaryl-Gly-Arg AMC in DMSO
      • Assay Buffer (Kit Component No. JA7682-20ML): 1 vial, 20 ml, HEPES buffer with surfactant
      • Dilution Buffer (Kit Component No. JA7683-20ML): 1 vial, 20 ml, low ionic strength HEPES buffer with surfactant
      • Cell Lysis Buffer (Kit Component No. 71009-10ML): 1 vial, 10 ml, CytoBuster™ Protein Extraction Buffer
      • 96-Well plate (Kit Component No. JA7666-1EA): 1 each
      • Sealer (Kit Component No. JB155-EA): 1 each
      Materials Required but not provided• Pipetman or multi-channel pipetman; use only pipettes that are carefully calibrated to their target volume.
      • Microplate reader capable of measuring fluorescence at wavelengths of 360-380 nm (excitation) and 430-460 nm (emission).
      • 37°C incubator
      • Ice bucket to keep reagents cold until use.
      Reagent preparationAll of the reagents necessary to perform the assay are supplied with this kit. Bring all the reagents to 15-25°C, except the standard which should be ket on ice until prior to use. • Standard: the urokinase standard is supplied as a 20 units/vial stock solution. Add 200 µl of chilled dilution buffer to the vial to obtain a 100 units/ml solution. Prepare a calibration curve by making serial dilutions of the standard in the range of 5 to 0.078 units/ml. Example: label 8 tubes. Pipet 570 µl of the assay buffer into the first tube and 300 µl into the remaining tubes. Add 30 µl of the 100 units/ml urokinase standard to the first tube. Vortex and transfer 300 µl from this tube to the next tube. Prepare serial dilutions by vortexing and transferring 300 µl up to tube 7. The tube labeled 8 will contain assay buffer only (blank). • Samples: if necessary dilute samples with assay buffer. Cell lysates with a concentration above 3 mg/ml should be diluted 5 times. If the measured RFU exceeds 12000 the sample should be diluted further. • Cell lysate: wash cell pellet with ice-cold PBS. Add 500-1000 µl of cell lysis buffer (~1 ml per 1 x 107 cells) and incubate on ice for 30 min. Vortex and centrifuge the lysate at 14,000 x g in a pre-cooled tabletop microcentrifuge. Immediately transfer the supernatant to a fresh microcentrifuge tube and discard the pellet. Dilute the lysate 1:5 or 1:10 before determining the protein concentration via BCA protein assay. • Substrate: dilute 100 times with dilution buffer.
      Detailed protocolBring all reagents and samples to room temperature before use. It is recommended that all samples, standard, and controls be assayed in duplicate.

      1. Prepare dilutions of standard, samples, and substrate. Remove plate from the foil pouch.
      2. Pipet 50 µl of assay buffer into each well.
      3. Add 100 µl of standard or sample to the desired wells.
      4. Add 50 µl of substrate solution to each well.
      5. Incubate the plate at 37°C for 1 h.
      6. Read the fluorescence of the free AMC on a fluorescence plate reader at excitation 360-380 nm and emission 440-460 nm.
      CalculationsThe data obtained can be displayed in two ways. 1. As RFU: correct the fluorescence value of the samples by subtracting the value of the blank, and then calculate the mean fluorescence value of each sample in duplicate. 2. As units/ml: calculate the mean fluorescence value as stated above. Plot a graph correlating the mean fluorescence values of the standards (y-axis) to the concentration of the urokinase standard in units/ml (x-axis). The urokinase activity of the unknown samples can be read from the standard calibration curve.
      Assay characteristics and examples

      Table 1: Urokinase activity

      Urokinase activity in five human cell lines and human plasma measured with the Urokinase Activity Assay, Cat. No. QIA125. Urokinase activity was not detected in Jurkat and HL-60 10X diluted lysates, with protein concentrations of 0.365 and 0.295 mg/ml, respectively. CytoBuster™ Protein Extraction Reagent (Cat. No. 71009) was used to prepare lysates.
      Standard curve

      Figure 1: Standard Curve

      Standard curve: generated with human urokinase. Enzyme activity was measured with Glutaryl-Gly-Arg AMC, pH 8.0, at 37°C as outlined in the Detailed Protocol.
      Sensitivity0.01 U/ml
      Assay Range0.78 - 50 U/ml