Millipore Sigma Vibrant Logo

343210 FITC Labeling Kit

FITC Labeling Kit : FDS (Fiches de données de sécurité), certificats d’analyse (CoA) et de qualité (CoQ), dossiers, brochures et autres documents disponibles.
View Products on Sigmaaldrich.com
343210
Voir les Prix & la Disponibilité

Aperçu

Replacement Information

Prix & Disponibilité

Référence DisponibilitéConditionnement Qté Prix Quantité
343210-1KIT
Récupération des données relatives à la disponibilité...
—
Disponibilité limitée Disponibilité limitée
En stock 
Interrompu(e)
Disponible en quantités limitées
Disponibilité à confirmer
    Pour le restant : Nous vous tiendrons informé
      Pour le restant : Nous vous tiendrons informé
      Nous vous tiendrons informé
      Contacter le Service Clients
      Contact Customer Service

      		 1 kit
      Prix en cours de récupération
      Le prix n'a pas pu être récupéré
      La quantité minimale doit être un multiple de
      Maximum Quantity is
      À la validation de la commande Plus d'informations
      Vous avez sauvegardé ()
       
      —
      Demander le prix
      		 —
      Description
      OverviewProvides means to quickly and simply label antibodies or other proteins with fluorescein. Direct labeling of the primary antibody eliminates the need for a secondary antibody, and results in a lower background and overall higher signal-to-noise ratio. Each kit is sufficient to perform at least five conjugations on proteins of 100 µg to 2.5 mg each.
      Catalogue Number343210
      Brand Family Calbiochem®
      References
      Product Information
      Kit containsFluorescein (five vials), Carbonate Buffer Concentrate, DMF Solvent, PBS Buffer Concentrate, and a user protocol.
      Quality LevelMQ100
      Applications
      Biological Information
      Physicochemical Information
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      R PhraseR: 20/21-28-32-36/37/38-42/43-61

      Harmful by inhalation and in contact with skin.
      Very toxic if swallowed.
      Contact with acids liberates very toxic gas.
      Irritating to eyes, respiratory system and skin.
      May cause sensitization by inhalation and skin contact.
      May cause harm to the unborn child.
      S PhraseS: 26-36-45-53

      In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
      Wear suitable protective clothing.
      In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
      Avoid exposure - obtain special instructions before use.
      Product Usage Statements
      Intended useThe Calbiochem® FITC Labeling Kit provides a means of quickly and simply labeling antibodies or other proteins with fluorescein. FITC-antibody conjugates are useful in many applications, such as flow cytometry and immunocytochemistry. Other proteins such as steroids may also be labeled with FITC. Direct labeling of the primary antibody eliminates the need for a secondary antibody, and therefore results in a lower background and an overall higher signal to noise ratio.
      Storage and Shipping Information
      Ship Code Ambient Temperature Only
      Toxicity Multiple Toxicity Values, refer to MSDS
      Hazardous Materials Attention: Due to the nature of the Hazardous Materials in this shipment, additional shipping charges may be applied to your order. Certain sizes may be exempt from the additional hazardous materials shipping charges. Please contact your local sales office for more information regarding these charges.
      Storage +2°C to +8°C
      Protect from Light Protect from light
      Do not freeze Ok to freeze
      Packaging Information
      Transport Information
      Supplemental Information
      Kit containsFluorescein (five vials), Carbonate Buffer Concentrate, DMF Solvent, PBS Buffer Concentrate, and a user protocol.
      Specifications
      Global Trade Item Number
      Référence GTIN
      343210-1KIT 07790788049249

      Documentation

      FITC Labeling Kit FDS

      Titre

      Fiche de données de sécurité des matériaux (FDS) 

      FITC Labeling Kit Certificats d'analyse

      TitreNuméro de lot
      343210

      Brochure

      Titre
      Kit SourceBook - 2nd Edition EURO
      Kits SourceBook - 2nd Edition GBP
      Protocole Utilisateur

      Revision25-February-2010 RFH
      Intended useThe Calbiochem® FITC Labeling Kit provides a means of quickly and simply labeling antibodies or other proteins with fluorescein. FITC-antibody conjugates are useful in many applications, such as flow cytometry and immunocytochemistry. Other proteins such as steroids may also be labeled with FITC. Direct labeling of the primary antibody eliminates the need for a secondary antibody, and therefore results in a lower background and an overall higher signal to noise ratio.
      Materials providedThis kit contains sufficient reagents to perform 5 conjugations of proteins with 0.1-2.5 mg each.

      • FITC (kit Component No. KP4801): 5 vials 0.85 mg each
      • Solvent Reagent (kit Component No. KP4802): 1 vial, 5.0 ml
      • Carbonate Buffer Concentrate (100X) (kit Component No. KP4803): 1 bottle, 100 ml
      • PBS Buffer Conc. (10X; with 1% sodium azide) (kit Component No. KP4804): 1 bottle, 100 ml
      PreparationAntibody/Protein Preparation: Add 10 ml of carbonate buffer concentrate to 990 ml of distilled water and dialyze antibody in buffer overnight.
      Detailed protocol1. Remove the antibody or other protein from dialysis and dilute or concentrate to a final concentration of 2 mg/ml. Place in container suitable for vortexing.
      2. Add 850 µl of Solvent Reagent to one vial of FITC. Mix thoroughly. The FITC should now be at a concentration of 1 mg/ml.
      3. If the protein being conjugated is not IgG, reserve a sufficient amount of the protein so that a 1 mg/ml solution can be measured in a cuvette of 1.0 cm path length in order to calculate the approximate concentration of the final conjugate (see step 3 of Determining the FITC/Protein Molar Ratio). This reserved protein will be used to calculate E0.1%.
      4. For 2.5 mg of antibody or other protein, pipette 500 µl of FITC mixture into the antibody solution and vortex immediately. This provides a conjugation ratio of 200 µg FITC to 1 mg antibody/protein. Mix end-over-end for 2 hours at room temperature, or transfer to a flask and mix with a stir bar and magnetic stirrer. If possible, seal container with aluminum foil while stirring to block out ambient light.
      5. Dilute PBS buffer concentrate 1:10 in distilled water (final azide concentration is 0.1%) for dialysis. Reserve sufficient diluted PBS buffer to prepare a spectrophotometric blank for determining the FITC to protein molar ratio. Transfer the conjugate to dialysis tubing and dialyze overnight at room temperature in the diluted PBS.
      6. Remove from dialysis tubing. Keep refrigerated (short term) or frozen (long term) and protect from light.
      Calculations1. Read the absorbance of the FITC-antibody conjugate at two wavelengths: 280 nm and 495 nm. Use the 1X PBS/0.1%NaN3 as the spectrophotometric blank. Optimal absorbance readings of the conjugated protein will be within the range of 0.2-1.2 ABS. 2. Using the two absorbance readings, calculate the F/P molar ratio of the FITC/Protein conjugate using the following equation:

      Figure 1: F/P Molar Ration

      3. There are 2 equations used for the determination of the concentration of the FITC-antibody conjugate. If the protein used for conjugation was IgG, use the following equation to estimate the concentration of the labeled antibody:

      Figure 2: Concentration of FITC-IgG

      If the protein conjugated was not IgG, use the following equation to estimate the concentration of conjugated protein:

      Figure 3: Concentration of FITC-Protein

      Where E0.1% is the A280 reading of a 1 mg/ml solution of the unconjugated protein, as measured in a cuvette of 1 cm path length.
      Registered TrademarksCalbiochem® is a registered trademark of EMD Chemicals, Inc.
      Interactive Pathways™ is a trademark of EMD Chemicals, Inc.