Millipore Sigma Vibrant Logo

Kit de chambres de diffusion

Proven devices for studying immunology, tissue growth, and organ transplants

  • Les chambres de diffusion sont des dispositifs qui ont fait leur preuve pour les études en immunologie ou les études de croissance tissulaire et de greffes d'organes.
  • Elles peuvent être utilisées avec des cellules en suspension, des tissus hachés ou des tissus entiers
  • Comprend la membrane, la colle et les anneaux en Plexiglas®

Aperçu

Caractéristiques

Guide d'achat

Go
Disques de 13 mm de diamètreSupprimer le tri & les filtres Show Filter
RéférenceDescriptionDimension de poresConditionnement
GVWP01300Membrane Durapore, PVDF hydrophile, 0,22 µm, 13 mm, blanche, unie 0.22 µm 100 Prix & Disponibilité
HVLP01300Membrane Durapore, PVDF hydrophile, 0,45 µm, 13 mm, blanche, unie 0.45 µm 100 Prix & Disponibilité
SVLP01300Membrane Durapore, PVDF hydrophile, 5,0 µm, 13 mm, blanche, unie 5.0 µm 100 Prix & Disponibilité
GSWP01300Membrane MF-Millipore, esters de cellulose, hydrophile, 0,22 µm, 13 mm, blanche, unie 0.22 µm 100 Prix & Disponibilité
HAWP01300Membrane MF-Millipore, esters de cellulose, hydrophile, 0,45 µm, 13 mm, blanche, unie 0.45 µm 100 Prix & Disponibilité
SMWP01300Membrane MF-Millipore, esters de cellulose, hydrophile, 5,0 µm, 13 mm, blanche, unie 5.0 µm 100 Prix & Disponibilité

Retourner en haut de la page

Anneaux en Plexiglas®Supprimer le tri & les filtres Show Filter
RéférenceDescriptionConditionnement
PR0001400Anneaux de Plexiglas® sans orifice 50 Prix & Disponibilité

Retourner en haut de la page

AccessoireSupprimer le tri & les filtres Show Filter
RéférenceDescriptionConditionnement
XX6200006PPince à bouts plats, arrondis, acier inoxydable 3 Prix & Disponibilité

Retourner en haut de la page

Documentation

FAQ

QuestionRéponse
What do I need to assemble diffusion chambers for studying the effects of implanted cells?You need three items: (1) Diffusion chamber rings with holes and nylon thread for plugging the holes, catalog number PR00 014 01, (2) 13 mm membrane filters, either 0.22 micron pore size (catalog number GSWP 013 00) or 0.45 micron pore size (catalog number HAWP 013 00), and (3) MF filter cement, catalog number XX70 000 00. Additional nylon thread can be purchased separately under the catalog number PR00 000 00.
How do I assemble a diffusion chamber containing tissue for implantation?
  1. Wet a single membrane filter (either GSWP 013 00 or HAWP 013 00) with Milli-Q water and blot it to absorbent paper to remove excess water.
  2. Glue the filter to one side of a diffusion chamber ring without hole (catalog number PR00 014 00), using MF cement (catalog number XX70 000 00), and let dry.
  3. Sterilize this assembly, along with another membrane filter of the same type, by exposure to ethylene oxide gas or ultraviolet light.
  4. Moisten the half-completed chamber and the separate sterile filter with a sterile physiological solution, and aseptically place the tissue to be studied in the half-completed chamber assembly.
  5. Glue the cover filter in place using sterile technique.
How do I assemble a diffusion chamber containing suspension cells for implantation?Wet two membrane filters (either GSWP 013 00 or HAWP 013 00) with Milli-Q water and blot them to absorbent paper to remove excess water. Glue a moist filter to each side of the diffusion chamber ring with hole (catalog number PR00 014 01) using MF cement (catalog number XX70 000 00). Sterilize the dried diffusion chamber with ethylene oxide gas or ultraviolet light. After sterilization, inject the cells through the hole in the plastic ring, and plug the hole with the nylon thread which comes with the rings (catalog number PR00 000 00 if ordered separately).