Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

K010A10HH1 Opticap® XL10 Clarigard® 1.0 µm 9/16 in. HB/HB

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
K010A10HH1
1  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Replacement Information
Description
Catalogue NumberK010A10HH1
Trade Name
  • Opticap®
DescriptionOpticap® XL10 Clarigard® 1.0 µm 9/16 in. HB/HB
References
Product Information
Device ConfigurationCapsule
Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Applications
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaClarigard®
Sterilization3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Physicochemical Information
Pore Size1.0 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Gravimetric ExtractablesThe extractables level was equal to or less than 15 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length10 in. (25 cm)
Length33.5 cm (13.2 in.)
Diameter10.7 cm (4.2 in.)
Inlet to Outlet Width33.5 cm (13.2 in.)
Device Size10 in.
Inlet Connection Diameter9/16 in.
Nominal Pore Size1.0 µm
Outlet Connection Diameter9/16 in.
Materials Information
Chemistry
  • Polypropylene (PP)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Packaging Information
Material Size1
Material PackageDouble Easy-Open bag
Transport Information
Supplemental Information
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L
Global Trade Item Number
Catalogue Number GTIN
K010A10HH1 04053252574221

Documentation

Certificates of Quality

Title
Opticap XL 10 Capsule Clarigard Media C3AB79079
Opticap XL 10 Capsule Clarigard Media C7SA05590
Opticap XL 10 Capsule Clarigard Media C0HB81663
Opticap XL 10 Capsule Clarigard Media C8JA93953
Opticap XL 10 Capsule Clarigard Media C9NA13417
Opticap XL 10 Capsule Clarigard Media - C7DA92020
Opticap XL 10 Capsule Clarigard Media - C8SA66416
Opticap XL 10 Capsule Clarigard Media C1HB15225
Opticap XL 10 Capsule Clarigard Media C2JB86263
Opticap XL 10 Capsule Clarigard Media C3KB37093
Show more

User Guides

Title
Opticap® XL Capsules and Opticap® XLT Capsules