Millipore Sigma Vibrant Logo

KWSCA3THH1 Opticap® XLT30 Milligard® 1.2/0.5 µm 5/8 in. HB/HB

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View Products on Sigmaaldrich.com
KWSCA3THH1
1  Double Easy-Open bag
正在检索价格......
无法检索价格。
最小订购数量为倍数
Maximum Quantity is
以订单确认为准 更多信息
您节约了 ()。
 
—
Request Pricing
—
目前缺货 目前缺货
有货 
停产
少量现货
供货情况有待确认
    其余：另行通知
      其余：另行通知
      另行通知
      联系客户服务
      Contact Customer Service

       

      联系客户服务

      概述

      Replacement Information
      Description
      Catalogue NumberKWSCA3THH1
      Trade Name
      • Opticap®
      DescriptionOpticap® XLT30 Milligard® 1.2/0.5 µm 5/8 in. HB/HB
      References
      Product Information
      FormatDouble Layer
      Device ConfigurationCapsule
      Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
      Filter GradeStandard Milligard® Media
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)3.5 bar (50 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line
      Quality LevelMQ400
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaMilligard®
      Sterilization3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
      Physicochemical Information
      Pore Size1.2 / 0.5 µm
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Gravimetric ExtractablesThe extractables level was equal to or less than 165 mg per capsule after 24 hours in water at controlled room temperature.
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length30 in. (75 cm)
      Length87.1 cm (34.3 in.)
      Filtration Area2.07 m²
      Inlet to Outlet Width19.8 cm (7.8 in.)
      Device Size30 in.
      Inlet Connection Diameter5/8 in.
      Nominal Pore Size1.2 / 0.5 µm
      Outlet Connection Diameter5/8 in.
      Materials Information
      Chemistry
      • Mixed Cellulose Esters (MCE)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L
      Global Trade Item Number
      产品目录编号 GTIN
      KWSCA3THH1 04053252604393

      相关产品和应用

      产品族

      Milligard® Capsule Filters

      Provide ease of use and convenience by eliminating the need for cartridge housing manipulations, and provide high retention efficiency.
      详细了解 >>

      Milligard® Capsule Filters

      Opticap® XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings.
      详细了解 >>

      相关产品，按下列排序： Brand Facete

      Opticap®

      种类

      Biopharmaceutical Manufacturing > Downstream Processing > Bioburden Reduction/Particulate Control > Membrane based > Milligard