Millipore Sigma Vibrant Logo

KGW2A2THH1 Opticap® XLT20 Polysep® II 1.0/1.2 µm 5/8 in. HB

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View Products on Sigmaaldrich.com
KGW2A2THH1
1  Double Easy-Open bag
正在检索价格......
无法检索价格。
最小订购数量为倍数
Maximum Quantity is
以订单确认为准 更多信息
您节约了 ()。
 
—
Request Pricing
—
目前缺货 目前缺货
有货 
停产
少量现货
供货情况有待确认
    其余：另行通知
      其余：另行通知
      另行通知
      联系客户服务
      Contact Customer Service

       

      联系客户服务

      概述

      Replacement Information
      Description
      Catalogue NumberKGW2A2THH1
      Trade Name
      • Opticap®
      DescriptionOpticap® XLT20 Polysep® II 1.0/1.2 µm 5/8 in. HB
      References
      Product Information
      FormatDouble Layer
      Device ConfigurationCapsule
      Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)3.5 bar (50 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Prefilter MaterialBorosilicate Glass Fiber (BGF)
      T-line/Gauge PortT-line
      Quality LevelMQ400
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaPolysep™ II
      Sterilization3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
      Physicochemical Information
      Pore Size1.0 / 1.2 µm
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Gravimetric ExtractablesThe extractables level was equal to or less than 290 mg per capsule after a 10 L flush and 24 hours in water at controlled room temperature.
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length20 in. (50 cm)
      Length62.5 cm (24.6 in.)
      Filtration Area0.92 m²
      Inlet to Outlet Width19.8 cm (7.8 in.)
      Device Size20 in.
      Inlet Connection Diameter5/8 in.
      Nominal Pore Size1.0 / 1.2 µm
      Outlet Connection Diameter5/8 in.
      Materials Information
      Chemistry
      • Mixed Cellulose Esters (MCE)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥10 L
      Global Trade Item Number
      产品目录编号 GTIN
      KGW2A2THH1 04053252254611