Millipore Sigma Vibrant Logo

KRK3A10HH1 Opticap® XL10 Polygard®-CR 0.3 µm 9/16 in. HB/HB

View Products on Sigmaaldrich.com
KRK3A10HH1
1  Double Easy-Open bag
正在检索价格......
无法检索价格。
最小订购数量为倍数
Maximum Quantity is
以订单确认为准 更多信息
您节约了 ()。
 
Request Pricing
目前缺货
目前缺货
有货 
停产
少量现货
供货情况有待确认
    其余:另行通知
      其余:另行通知
      另行通知
      联系客户服务
      Contact Customer Service

       

      联系客户服务

      概述

      Replacement Information
      Description
      Catalogue NumberKRK3A10HH1
      ReplacesKRK301HB1
      Trade Name
      • Opticap®
      DescriptionOpticap® XL10 Polygard®-CR 0.3 µm 9/16 in. HB/HB
      References
      Product Information
      FormatSingle Layer
      Device ConfigurationCapsule
      Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)4.8 bar (70 psid) @ 20 °C
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Quality LevelMQ400
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaPolygard®-CR
      Sterilization3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
      Physicochemical Information
      Pore Size0.3 µm
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Gravimetric ExtractablesThe extractables level was equal to or less than 55 mg per capsule after 24 hours in water at controlled room temperature.
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length10 in. (25 cm)
      Length33.5 cm (13.2 in.)
      Diameter10.7 cm (4.2 in.)
      Inlet to Outlet Width33.5 cm (13.2 in.)
      Device Size10 in.
      Inlet Connection Diameter9/16 in.
      Nominal Pore Size0.3 µm
      Outlet Connection Diameter9/16 in.
      Materials Information
      Chemistry
      • Polypropylene (PP)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
      Global Trade Item Number
      产品目录编号 GTIN
      KRK3A10HH1 04053252498213

      相关产品和应用

      产品族

      相关产品,按下列排序: Brand Facete

      种类

      Biopharmaceutical Manufacturing > Downstream Processing > Bioburden Reduction/Particulate Control > Depth Filter based > Polygard CR
      Biopharmaceutical Manufacturing > Downstream Processing > Clarification > Clarisolve Depth Filters > Polygard Filters > Polygard CR