Millipore Sigma Vibrant Logo

KHGEG1TTT1H Gamma Compatible High Area Opticap® XLT 10 Millipore Express® SHC 0.5  µm/0.2 µm 1-1/2 in. TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View Products on Sigmaaldrich.com
KHGEG1TTT1H
1  Double Easy-Open bag
正在检索价格......
无法检索价格。
最小订购数量为倍数
Maximum Quantity is
以订单确认为准 更多信息
您节约了 ()。
 
—
Request Pricing
—
目前缺货 目前缺货
有货 
停产
少量现货
供货情况有待确认
    其余：另行通知
      其余：另行通知
      另行通知
      联系客户服务
      Contact Customer Service

       

      联系客户服务

      概述

      Replacement Information
      Description
      Catalogue NumberKHGEG1TTT1H
      Trade Name
      • Millipore Express®
      DescriptionGamma Compatible High Area Opticap® XLT 10 Millipore Express® SHC 0.5  µm/0.2 µm 1-1/2 in. TC
      OverviewFamily (FID): Express (FID19B),
      Organism Retention: Microorganism
      Mode of Action: Filtration (size exclusion)
      Application: BioProcessing
      Intended Use: Reduction or removal of microorganism/bioburden
      Instructions for Use: Please refer installation section of Opticap® XL Capsules and Opticap® XLT Capsules User Guide.
      Storage Statement: Store in dry location.
      Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations.
      Label statement: Directions for use refer to website.
      Label statement: Directions for Use refer Opticap® XL Capsules and Opticap® XLT Capsules User Guide on website (custom product only).
      References
      Product Information
      HS Code8421 22 00
      Connections, Inlet/Outlet38 mm (1-1/2 in.) Sanitary Flange
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line
      Quality LevelMQ400
      Applications
      Key Applications
      • Laboratory Filtration
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      SterilityNon-sterile, Gamma compatible
      SterilizationGamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.5 / 0.2 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionSanitary Flange
      Air Diffusion at 23 °C≤56.4 mL/min @ 2.75 bar (40 psig) in water
      Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80
      Maximum Inlet Temperature25°C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 21 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      Dimensions
      Cartridge Nominal Length10 in. (25 cm)
      Length37.6 cm (14.8 in.)
      Diameter10.7 in. (4.2 cm)
      Filtration Area10000 cm2
      Inlet to Outlet Width15.2 cm (6.0 in.)
      Device Size10 in.
      Outlet Connection Diameter1.5 in.
      Materials Information
      Chemistry
      • Hydrophilic Polyethersulfone (PES)
      Device Material
      • Polypropylene/Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L
      Global Trade Item Number
      产品目录编号 GTIN
      KHGEG1TTT1H 04054839167850

      Documentation

      Material Qualification Dossier

      标题版本
      1.0

      Operational Excellence Dossier

      Title

      质量证书

      标题
      OPTICAP XLT 10 Capsule Millipore Express SHC High area membrane C3MB59358
      Opticap XL 10 Capsule Millipore Express SHC High Area Membrane C0PB26227
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C0JB89740
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C3HB20003
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C9AA44665
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8BA06644
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8DA35233
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C8JA78864
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane - C9HA44480
      Opticap XLT 10 Capsule Millipore Express SHC High Area Membrane C1HB80684
      Show more

      技术信息

      标题
      Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
      Extended bacterial retention testing of Millipore Express® 0.2 μm filters in a continuous flow system
      Simplified, efficient sizing of sterilizing-grade normal flow filters for buffer solutions

      数据表

      标题
      Millipore Express®SHC Hydrophilic Filters

      用户指南

      标题
      User Guide - Filters with Millipore Express®Membrane