数量	产品目录编号	订购说明	数量 / 包装	公开价
			96-Well Plate

数量	产品目录编号	订购说明	数量 / 包装	公开价
	48-602MAG	Buffer Detection Kit for Magnetic Beads	1 Kit

分配压力罐

用于分配液体，最大体积20 L 更多

问题	回答
Can I filter hot liquids in my pressure vessel?	NOTE: This technique is not recommended for any potentially combustible solvents. Care should be taken before proceeding. In addition to being autoclavable, the pressure vessel can also be heated before and during filtrations. We have heated the unit to as high as 90C while in use. We have filtered liquids with the entire pressure vessel and filtration apparatus in an oven, have put the vessel into hot water baths, and have used a hot plate. The hot plate did not provide good heat distribution and the rubber bottom burned slightly under the direct heat contact, but this method could still be used in a pinch. In our experience we found that heating in the oven was the best choice with the water bath a close second. Of course, before doing this it is important that you check 1) the compatibility of your liquid with the o-rings and stainless steel under elevated temperatures, and 2) the flammability/volatility of your liquid being filtered. This technique is not recommended for any potentially combustible solvents. One example of a potentially combustible solvent is Isopropanol.

C195用于分配液体，最大体积20 L

分配压力罐用来存放液体，如果压力罐连接了外部压力源，那么其中液体便可通过Millipore加压过滤器得以过滤。压力罐符合ASME®-UM规范要求。密封盖用凸轮锁定手柄锁固。排气后可高温高压灭菌。释压阀、压力计和软管接头均符合辅件规范要求。辅件密封盖可保证压力罐在真空环境下使用。

部件 a - e 随罐提供。 f - k 作为附件需另行订购。

说明：Merck建议使用前先安装通气/释压阀（下图部件f，Merck货号为XX67 00L 24），以符合“压力指引“的安全要求。

分配压力罐用来存放液体，以通过Millipore加压过滤器进行过滤。

大体积过滤，用于缓冲液和溶剂分配的容器

规格
材料	316 不锈钢壳体；不锈钢接头；氟垫圈和O-型圈；注塑氯丁橡胶底座
接口
最大入口压力*	6.9 bar (100 psi)
最高温度，°C	121
*最大允许压力应参考当地现行的压力容器规范。禁止在真空状态下使用没有压力密封盖的压力罐。

选择品种	.
选择板面类型	.
选择试剂盒	.
选择样品类型	对于某些板面，样品类型将决定可以将哪些分析物复合（plex）在一起。