Millipore Sigma Vibrant Logo

扩散室套件

的扩散室套件是经验证的装置，适用于免疫、组织增长及器官移植研究。

  • 扩散室套件是经验证的装置，适用于免疫、组织增长及器官移植研究。
  • 可配合悬浮细胞或者细分的组织或整体组织使用
  • 包含膜、胶和Plexiglas®室环

概述

规格

订货信息

继续
13 mm直径圆片清除排序和过滤条件 Show Filter
产品目录编号描述孔径包装大小
GVWP01300Durapore 表面滤膜，PVDF，亲水，0.22 µm，13 mm，白色，光面 0.22 µm 100 显示价格及库存情况
HVLP01300Durapore 表面滤膜，PVDF，亲水，0.45 µm，13 mm，白色，光面 0.45 µm 100 显示价格及库存情况
SVLP01300Durapore 表面滤膜，PVDF，亲水，5.0 µm，13 mm，白色，光面 5.0 µm 100 显示价格及库存情况
GSWP01300MF-Millipore滤膜，混合纤维素酯滤膜 0.22 µm 亲水性，0.22 µm，13 mm，白色，平纹，100 显示价格及库存情况
HAWP01300MF-Millipore滤膜，混合纤维素酯滤膜 0.45 µm 亲水性，0.45 µm，13 mm，白色，平纹，100 显示价格及库存情况
SMWP01300MF-Millipore滤膜，混合纤维素酯滤膜 5.0 µm 亲水性，5.0 µm，13 mm，白色，平纹，100 显示价格及库存情况

返回顶部

Plexiglas® 环清除排序和过滤条件 Show Filter
产品目录编号描述包装大小
PR0001400Plexiglas® 环，无孔 50 显示价格及库存情况

返回顶部

辅件清除排序和过滤条件 Show Filter
产品目录编号描述包装大小
XX6200006P滤膜专用镊子，平头，不锈钢 3 显示价格及库存情况

返回顶部

Documentation

问与答

问题回答
What do I need to assemble diffusion chambers for studying the effects of implanted cells?You need three items: (1) Diffusion chamber rings with holes and nylon thread for plugging the holes, catalog number PR00 014 01, (2) 13 mm membrane filters, either 0.22 micron pore size (catalog number GSWP 013 00) or 0.45 micron pore size (catalog number HAWP 013 00), and (3) MF filter cement, catalog number XX70 000 00. Additional nylon thread can be purchased separately under the catalog number PR00 000 00.
How do I assemble a diffusion chamber containing tissue for implantation?
  1. Wet a single membrane filter (either GSWP 013 00 or HAWP 013 00) with Milli-Q water and blot it to absorbent paper to remove excess water.
  2. Glue the filter to one side of a diffusion chamber ring without hole (catalog number PR00 014 00), using MF cement (catalog number XX70 000 00), and let dry.
  3. Sterilize this assembly, along with another membrane filter of the same type, by exposure to ethylene oxide gas or ultraviolet light.
  4. Moisten the half-completed chamber and the separate sterile filter with a sterile physiological solution, and aseptically place the tissue to be studied in the half-completed chamber assembly.
  5. Glue the cover filter in place using sterile technique.
How do I assemble a diffusion chamber containing suspension cells for implantation?Wet two membrane filters (either GSWP 013 00 or HAWP 013 00) with Milli-Q water and blot them to absorbent paper to remove excess water. Glue a moist filter to each side of the diffusion chamber ring with hole (catalog number PR00 014 01) using MF cement (catalog number XX70 000 00). Sterilize the dried diffusion chamber with ethylene oxide gas or ultraviolet light. After sterilization, inject the cells through the hole in the plastic ring, and plug the hole with the nylon thread which comes with the rings (catalog number PR00 000 00 if ordered separately).