Milli-Q® IX 7003/05/10/15 Water Purification System
Recommended Products
-
8070500250 Sigma-Aldrich 2-Propyn-1-ol -
1086432500 SAFC Triton® X-100 -
822333 Sigma-Aldrich Hydroquinone -
102532 Supelco Sulfate Cell Test
Overview
Specifications
Ordering Information
Documentation
Related Products & Applications
Categories
| Lab Water Purification > Milli-Q® Type 2 Pure Water Systems > Milli-Q® IX Water Purification |
For full confidence that water is not influencing your analyses, Milli-Q® IX pure water systems provide a reliable source of high-quality Type 2 pure water to feed your lab’s needs: from general laboratory uses, such as instrument feed or buffer preparation, to your critical applications, such as microbiology culture media or staining solutions.
Milli-Q® IX systems have also been awarded our Greener Alternative Product label, meaning that these systems have been certified to use less electricity, water and plastic compared to our previous generation systems, and also incorporate mercury-free bactericidal UV lamps.
Water Specifications / International Conformity
| Pure, Type 2 water specifications1 | |
| Resistivity at 25 °C2 | > 5 MΩ·cm; Typically 10-15 MΩ·cm |
| TOC | ≤ 30 ppb |
| Production flow rate | 3 L/h (Milli-Q® IX 7003) 5 L/h (Milli-Q® IX 7005) 10 L/h (Milli-Q® IX 7010) 15 L/h (Milli-Q® IX 7015) |
| From an E-POD® dispenser with final filter, the following water quality specifications are achieved:1 | |
| Particles3,4 | No particles with size > 0.22 µm |
| Bacteria5 | ≤ 10 cfu/L |
| Pyrogens (endotoxins)6 | < 0.001 EU/mL |
| RNases4 | < 1 pg/mL |
| DNases4 | < 5 pg/mL |
| Proteases4 | < 0.15 µg/mL |
| Flow rate | Up to 2 L/min |
| 1 These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. 2 Resistivity can also be displayed non-temperature-compensated as required by USP. 3 With Millipak® or Millipakv Gold filter. 4 With Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood. 5 With Biopak® polisher when installed and used in a laminar flow hood. 6 With Biopak® polisher. |
|
| Feed water requirements | |
| Feed water | Potable tap water |
| Pressure | 1 – 6 bar |
| Conductivity | < 2000 µS/cm at 25 °C |
| Total Organic Carbon (TOC) | < 2 ppm |
| Temperature | 5 – 35 °C / 41 – 95 F |
| Electric power source voltage | 100 – 240 VAC ± 10% |
| Electric power source frequency | 50 – 60 Hz ± 2 Hz |
| Purification Unit (7003/7005) | |
| Dimensions (H x W x D) | 498 x 315 x 380 mm (19.6 x 12.4 x 15.0 in) |
| Operating weight | 23.4 kg (51.6 lb) |
| Purification Unit (7010/7015) | |
| Dimensions (H x W x D) | 498 x 375 x 380 mm (19.6 x 14.8 x 15.0 in) |
| Operating weight (7010) | 27.1 kg (59.8 lb) |
| Operating weight (7015) | 27.4 kg (60.5 lb) |
| Storage tanks | |
| 25 L Dimensions (H x W x D) Operating weight |
503 x 400 x 415 mm (19.8 x 15.7 x 16.3 in) 31.7 kg (70 lb) |
| 50 L Dimensions (H x W x D) Operating weight |
706 x 400 x 415 mm (27.8 x 15.7 x 16.3 in) 57.6 kg (127 lb) |
| 100 L Dimensions (H x W x D) Operating weight |
1118 x 400 x 415 mm (44.0 x 15.7 x 16.3 in) 110.9 kg (244 lb) |
System Specifications
| E-POD® dispenser | |
| Dimensions (Maximum H x W x D) | 792 x 211 x 439 mm (31.2 x 8.3 x 17.3 in) |
| Operating weight | 5.5 kg (12.1 lb) |
| Electrical connection | Powered by purification unit (24 – 28 VDC) |
International Regulatory Requirements
EU declaration of conformity – UL safety marking
The Milli-Q® IX 7003/05/10/15 system has been designed and manufactured in accordance to the international standard and test method defined by the IECEE organization according CB Scheme process. CB Scheme process was applied for electromagnetic compatibility and safety compliance.
The Milli-Q® IX 7003/05/10/15 system is also subject of the UL listing Marking Program and meets the following marking and registration requirements listed below:
- UL registration can be verified on the UL web site.
- Access to CB certificate: IECEE web site.