It appears that your browser has JavaScript disabled.

This Website requires your browser to be JavaScript enabled.

Please enable JavaScript and reload this page.

Atención: Nos hemos mudado. Los productos Merck Millipore ya no pueden adquirirse en MerckMillipore.com

MFSL20GT3 MilliporeNon-sterilized Millipak^® Final Fill 200 Filter Unit 5.0 µm 1 1/2 in. TC/TC

Productos recomendados

Descripción

Replacement Information

Description
Catalogue Number	MFSL20GT3
Trade Name	Millipak^®
Description	Non-sterilized Millipak^® Final Fill 200 Filter Unit 5.0 µm 1 1/2 in. TC/TC

References

Product Information
Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1½ in.) sanitary flange inlet and outlet
Maximum Differential Pressure, bar (psid)	Foward:80 psi (5.5 bar) at 25 °C (0.1 µm, 0.22 µm, 0.45 µm, hydrophobic 0.22 µm); Reverse: 10 psi (0.7 bar) at 25 °C
Maximum Inlet Pressure, bar (psi)	80 psi (5.5 bar) at 25 °C
Good Manufacturing Practices	These products are manufactured in a facility which is certified to ISO® 9001:2015 Quality Management Systems.
Quality Level	MQ400

Applications

Biological Information
Bacterial Endotoxins	Aqueous extraction contains < 0.25 EU/mL per device as determined using the Limulus Amebocyte Lysate (LAL) test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.
Media	Durapore^®
Sterility	non-sterilized
Sterilization	Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126 °C. Devices can withstand a dose ≤ 40 kGy gamma exposure.
Wettability	Hydrophilic

Physicochemical Information
Pore Size	5.0 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Bubble Point at 23 °C	≥ 2.0 psi (138 mbar) air with water
Flow Rate	7.6 L/min @ 0.69 bar ∆P
Non-Fiber Releasing	This product was manufactured with a Durapore® membrane which meets the criteria for a “non-fiber releasing” filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP <788> Particulate Matter in Injections
USP Bacterial Endotoxins	Aqueous extraction contains < 0.25 EU/mL per device as determined using the Limulus Amebocyte Lysate (LAL) test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.

Dimensions
Filtration Area	1000 cm²
Process Volume	200 L
Inlet Connection Diameter	1 1/2 in.
Outlet Connection Diameter	1 1/2 in.

Materials Information
Chemistry	Polyvinylidene Fluoride (PVDF)
Device Material	Polysulfone
Support Material	Polysulfone

Toxicological Information

Safety Information according to GHS

Safety Information

Product Usage Statements

Storage and Shipping Information

Packaging Information
Material Size	3
Material Package	Double Easy-Open bag

Transport Information

Supplemental Information

Specifications

Global Trade Item Number
Número de referencia	GTIN
MFSL20GT3	04054839379574

Documentation

Material Qualification Dossier

Cargo	Versión
EMPROVE® Material Qualification Dossier - MFSL20GT3	1.0

Operational Excellence Dossier

Title
Non-sterilized Millipak® Final Fill 200 Filter Unit 5.0 µm 1 1/2 in. TC/TC

Certificados de calidad

Cargo
Millipak Final FIll Capsule Durapore Membrane C1PB93063
Millipak Final Fill Capsule Durapore Membrane C3MB59554
Millipak Final Fill Capsule Durapore membrane C4BB80297

Licencias necesarias e Información técnica

Cargo
Improved Product Recovery using Blow-down and Millipak®Final Fill Filters
Integrity Test Troubleshooting - Beyond Rewet and Retest
Reduce Contamination Risks and Simplify Filtration System Design and Operation

Manuales del usuario

Cargo
Wetting Instructions for Filter Units with Durapore Membrane

Productos y aplicaciones relacionados

Familias de productos

Visto recientemente