S7113 Sigma-AldrichDAPI/Antifade Solution, Ready to Use

In this study, the polymer thin films containing micropatterns and biological functionalities were created by one-step procedure. The adjustable compositions among poly(methyl methacrylate) (PMMA), solvents, nonsolvent, and additional macromolecules formed the polymer thin films with different diameters ranging from 5 to 37 μm. The influences of topographical and chemical cues were investigated by directly cultivating L-929 fibroblasts on the prepared samples. The results revealed the predominant effect of surface topography that the cell density of L-929 fibroblasts increased proportionally with the average diameter of microconcaves. The cell number raised significantly on the PMMA thin films containing type I collagen and dopamine, with or without microstructures. On the other hand, the addition of bovine serum albumin in PMMA limited the growth of cells. The surface chemical composition and cell responses were evaluated by electron spectroscopy for chemical analysis (ESCA), viability assay, and immunostaining, respectively. This work proposed a simple and effective approach to incorporate the biological functions and surface topography simultaneously onto surface of materials that provided further applications for biomedical materials.

Condensation/aggregation process of rabbit-derived chondrocytes on a fibroin-coated patterned substrate was observed to estimate initial aggregation process in fibroin sponge. Chondrocytes were seeded on array of 160 microm diameter pits in three densities: 5 cells/pit (2.5 x 10(4) cells/cm(2), LOW), 15 cells/pit (7.5 x 10(4) cells/cm(2), MID) and 25 cells/pit (12.5 x 10(4) cells/cm(2), HIGH). In the MID and HIGH groups, cells tended to form aggregates after 24 h after cell seeding. In the LOW group, cell aggregate were not seen in a majority of the pits. Observation of aggregates using confocal laser scanning microscope showed that the chondrocytes at the interface of the fibroin surface tended to extend to the surface, developing an extensive network of stress fibers throughout the cytoplasm. On the other hand, chondrocytes in the other part of the aggregates maintained spherical shape, and most of the actin was localized in the cell cortex as opposed to in stress fibers. These results suggest two functional structures in the aggregates, which may explain the good balance between the maintenance of their differentiated phenotype and proliferation rate in the fibroin sponge.

Initial chondrocyte-silk fibroin interactions are implicated in chondrogenesis when using fibroin as a scaffold for chondrocytes. Here, we focused on integrin-mediated cell-scaffold adhesion and prepared cell adhesive fibroin in which a tandem repeat of the Arg-Gly-Asp-Ser (RGDS) sequence was genetically interfused in the fibroin light chain (L-chain) (L-RGDSx2 fibroin). We investigated the effects of the sequence on chondrocyte adhesion and cartilage synthesis, in comparison to the effects of fibronectin. As the physicochemical surface properties (e.g., wettability and zeta potential) of the fibroin substrate were not affected by the modification, specific cell adhesion to the RGDS predominately changed the chondrocyte adhesive state. This suggestion was also supported by the competitive inhibition of chondrocyte attachment to the L-RGDSx2 fibroin substrate with soluble RGD peptides in the medium. Unlike fibronectin, the expression of RGDS in the fibroin L-chain had no effect on chondrocyte spreading area but enhanced mRNA expression levels of integrins alpha5 and beta1, and aggrecan at 12 h after seeding. Although both the sequence and fibronectin increased cell adhesive force, chondrocytes grown on the fibroin substrate exhibited a peak in the force with time in culture. These results suggested that moderate chondrocyte adhesion to fibroin induced by the RGDS sequence was able to maintain the chondrogenic phenotype and, from the histology findings, the sequence could facilitate chondrogenesis.