Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KTGRA02HH3 Opticap Sterilizing Grade XL2 Aervent 0.2 µm 9/16 in. HB/HB

KTGRA02HH3
3  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Description
Catalogue NumberKTGRA02HH3
ReplacesKTGP04HB3
Trade Name
  • Opticap®
DescriptionOpticap Sterilizing Grade XL2 Aervent 0.2 µm 9/16 in. HB/HB
Product Information
Device ConfigurationCapsule
Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid) @ 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Quality LevelMQ400
Biological Information
MediaAervent®
Sterilization30 autoclave cycles of 30 min @ 135 °C; not in-line steam sterilizable
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophobic
Physicochemical Information
Pore Size0.2 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Bubble Point at 23 °C≥1100 mbar (16 psig) nitrogen with 70/30 % IPA/water
Gravimetric ExtractablesThe extractables level was equal to or less than 15 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
HydroCorr≤0.12 mL/min @ 2.6 bar (38 psig)
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length5.5 in. (14.0 cm)
Length14.0 cm (5.5 in.)
Diameter8.4 cm (3.3 in.)
Filtration Area0.1 m²
Inlet to Outlet Width14.0 cm (5.5 in.)
Device Size2 in.
Inlet Connection Diameter9/16 in.
Outlet Connection Diameter9/16 in.
Materials Information
Chemistry
  • Polytetrafluoroethylene (PTFE)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Packaging Information
Material Size3
Material PackageDouble Easy-Open bag
Global Trade Item Number
Catalogue Number GTIN
KTGRA02HH3 04053252264030