Optiseal Sanitary Cartridge Housings European Version
Recommended Products
-
438195-10MG Sigma-Aldrich LRRK2 Inhibitor III, HG-10-102-01 - Calbiochem
Overview
Specifications
Ordering Information
Documentation
Related Products & Applications
Product Families
Aervent® Membrane in Optiseal® FiltersOptiseal filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.Learn More >> |
Related Products By: Application Facete
| Dialysis and Filtration |
Related Products By: Brand Facete
| Optiseal® |
Categories
| Biopharmaceutical Manufacturing > Downstream Processing > Multi-use Processing Systems > Filter Housings |
Description
The Optiseal™ housing is designed for sterile filtration of aqueous solutions and gases using Optiseal cartridge filters. All wetted surfaces are constructed of 316L stainless steel and are electropolished, providing excellent durability and maximum corrosion resistance.
The housing features easy-to-clean vents, drains, and connections for complete sterilization. Vent-insulating rings are included for added safety.
The housing accommodates a double O-ring cartridge configuration, allowing a positive cartridge seal and preventing bacterial and particulate bypass. The Optiseal housing is designed to engage hold-down tabs on the Optiseal cartridge that lock the cartridge in place when the housing is fully assembled.
A Certificate of Quality (type 2.2 according to EN10204) is provided with the product to confirm components conformity and list QA lot release criteria.
Dimensions
| Inlet to Outlet Width | Weight | |
| In-line housing | 20 cm (7.9 in.) | 1.9 kg (4.2 lb.) |
| T-line housing | 22.9 cm (9 in.) | 3 kg (6.6 lb.) |
| Materials of Construction | |
| Housing; Clamp | 316L stainless steel housing; 304 stainless steel clamp |
| Seals | Silicone (meets the FDA requirements cited in 21 CFR 177.2600) |
| Vent Insulators | EPDM |
| Surface Finish | |
| Wetted Surfaces | Mechanical polished and electropolished, Ra ≤0.5 µm (20 μin) |
| Exterior Surfaces | Mechanical and electropolished |
| Connections | |
| Inlet/Outlet | 3/4 in. or 1 1/2 in. TC flange |
| Vent/Drain | 1/4 in. Hose Barb |
| Cartridge | Double O-rings (2-123) with hold-down tabs |
| Dome to Base | 3 in. Sanitary Gasket |
| Maximum Operating Pressure, bar (psi) | 6 bar (87 psi) to 10 bar (145 psi) depending on configuration @ 110 °C |
| Mounting | Can be supported by braced rigid tubing connections |
| Sterilization | In-line steam sterilizable at 121 °C to 145 °C |