Millipore Sigma Vibrant Logo

AP1504200 Glasfaser-Filter mit Bindemittel, AP15, 42 mm

1.0 um pore size, hydrophilic glass fiber with binder resin, 42 mm diameter

View Products on Sigmaaldrich.com
AP1504200
100  
Preis wird abgerufen...
Preis nicht abrufbar
Die Mindestmenge muss ein Vielfaches sein von
Maximum Quantity is
Bei Bestätigung Weitere Informationen
Sie haben () gespart
 
—
Bitte erfragen
—
Eingeschränkte Verfügbarkeit Eingeschränkte Verfügbarkeit
Lieferbar 
Produkt wurde eingestellt
Begrenzter Lagerbestand
Bestätigung der Verfügbarkeit erforderlich
    Restmenge: Angebot folgt
      Restmenge: Angebot folgt
      Bitte erfragen
      Kontakt zum Kundenservice
      Contact Customer Service

       

      Kontakt zum Kundenservice

      Übersicht

      Replacement Information
      Beschreibung
      BestellnummerAP1504200
      BeschreibungGlasfaser-Filter mit Bindemittel, AP15, 42 mm
      HintergrundinformationenOverview
      Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

      Glass Fiber Filters with Binder Resin:
      Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

      Type AP15
      •Lowest dirt-holding capacity
      •Recommended prefilter for 0.2 to 0.6 µm filters

      Type AP20
      •Lower retention, higher dirt-holding capacity than AP15 filters
      •Recommended prefilter for 0.8 to 8.0 µm filters
      •Use upstream to protect type AP15 filters

      Type AP25
      •Added thickness yields same retention and greater dirt-holding capacity as AP20
      •Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
      •Use upstream to protect type AP15 filters

      Glass Fiber Filters without Binder Resin:
      The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

      Type APFA
      •Retains fine particles with good efficiency, even at high flow rates
      •Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
      •Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

      Type APFB
      •Higher mechanical strength when wet and greater loading capacity than type APFA filters
      •Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

      Type APFC
      •Greater retention, especially for fine particulate and microorganism removal than type APFA filters
      •Use for determining total suspended solids in drinking water
      •Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

      Type APFD
      •Thick filter with high flow and low retention
      •Use for clarifying suspensions containing particulates greater than 1.0 µm

      Type APFF
      •Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
      •Recommended for USEPA method 1311 for TCLP analysis

      Type AP40
      •Recommended for Standard Methods Total Suspended Solids 2540D
      •Recommended for USEPA method 1311 for TCLP analysis
      •Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
      •Recommended for determining volatile suspended matter in wastewater and industrial effluents
      Literatur
      Produktinformationen
      HS-Code 7019 90 00
      FiltercodeAP15
      FilterfarbeWeiß
      Maximale Betriebstemperatur100 °C
      FiltertypTiefenfilter
      Anwendungen
      Anwendung1.0 um pore size, hydrophilic glass fiber with binder resin, 42 mm diameter
      Biologische Informationen
      BenetzbarkeitHydrophil
      Physiochemische Informationen
      Porengröße1.0 µm
      Porosität %90%
      Wasserfließrate
      • 1.6 mL/min x cm²
      Abmessungen
      FilteroberflächeGlatt
      Dicke790 µm
      Filterdurchmesser (⌀)42 mm
      Materialinformationen
      Chemie
      • Glasfaser mit Kunstharz
      Angaben zur Toxikologie
      Sicherheitsinformationen gemäß GHS
      Sicherheitshinweise
      Hinweise zum Produktgebrauch
      Lagerungs- und Versandinformationen
      Verpackungsinformationen
      Menge100
      Transportinformationen
      Ergänzende Informationen
      Spezifikationen
      Global Trade Item Number
      Bestellnummer GTIN
      AP1504200 04053252337468

      Documentation