Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

109080 硝酸银溶液

c(AgNO₃) = 1 mol/l (1 N) Titripur®

硝酸银溶液 MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
109080
Purchase on Sigma-Aldrich

概述

Replacement Information

Products

产品目录编号包装 数量 / 包装
1.09080.1000 塑胶瓶 1 l
1.09080.1003 塑胶瓶 1 l
描述
产品目录编号109080
参考
产品信息
HS代码2843 21 00
Quality LevelMQ200
应用
生物信息
理化信息
密度1.14 g/cm3 (20 °C)
pH值7 - 9 (H₂O, 20 °C)
尺寸
材料信息
毒性学信息
GHS安全信息
危害性图示 危害性图示
危害性图示
危害性图示
危害性声明H290: 可能腐蚀金属。
H314: 造成严重皮肤灼伤和眼损伤。
H360D: 可能对胎儿造成伤害。
H410: 对水生生物毒性极大并具有长期持续影响。
注意事项声明P202: 在阅读并了解所有安全预防措施之前，切勿操作
P273: 避免释放到环境中。
P280: 配戴防护手套/防护服/护目用具/防护面具/听力保护装备.
P303 + P361 + P353: 如皮肤（或头发）沾染：立即脱掉所有沾染的衣服。用水清洗皮肤。
P304 + P340 + P310: 如果吸入：将患者移至空气新鲜处并保持呼吸舒适的姿势休息。 立即呼叫中毒控制中心或就医。
P305 + P351 + P338: 如进入眼睛：用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出，取出隐形眼镜。继续冲洗。
提示语危险
储存类别6.1D 不可燃，急毒种类3 / 毒性化合物或者引起慢性影响的化合物
WGKWGK 3 高度的水危害
一次性27
含有可回收高价金属的残余物: 第H类.
安全信息
危险种类?????, ?????
产品使用声明
储存和货运信息
储存于 +15°C 到 +25°C储存.
包装信息
运输信息
申报（铁路和陆路）ADR、RIDUN 3264 , 8, II
申报（空运）IATA-DGRUN 3264 , 8, II
申报（海运）IMDG-代码UN 3264 , 8, II, Segregation Group: 1 (Acids)
补充信息
规格
Formliquid
Amount-of-substance concentration0.995 - 1.005 mol/l
Measurement uncertainty+/- 0.003
TraceabilityNIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 999 potassium chloride) by means of volumetric standard sodium chloride (article number 1.02406), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Global Trade Item Number
产品目录编号 GTIN
1.09080.1000 04022536110486
1.09080.1003 04054839753015