Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KVGLA3TTT1 Opticap® XLT30 Durapore® 0.22 µm 1-1/2 in. TC/TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
KVGLA3TTT1
1  Double Easy-Open bag
Purchase on Sigma-Aldrich

概述

Replacement Information
Description
Catalogue NumberKVGLA3TTT1
Trade Name
  • Opticap®
DescriptionOpticap® XLT30 Durapore® 0.22 µm 1-1/2 in. TC/TC
References
Product Information
HS Code8421 29 90
Device ConfigurationCapsule
Connections, Inlet/Outlet38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
T-line/Gauge PortT-line
Quality LevelMQ400
Applications
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaDurapore®
SterilityOther
Sterilization3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.22 µm
Inlet ConnectionSanitary Flange
Outlet ConnectionSanitary Flange
Air Diffusion at 23 °C≤40 mL/min @ 2.75 bar (40 psig) in water
Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
Gravimetric ExtractablesThe extractables level was equal to or less than 75 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length30 in. (75 cm)
Length87.1 cm (34.3 in.)
Diameter10.7 cm (4.2 in.)
Filtration Area2.1 m²
Inlet to Outlet Width15.2 cm (6.0 in.)
Device Size30 in.
Inlet Connection Diameter1-1/2 in.
Outlet Connection Diameter1-1/2 in.
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Packaging Information
Material Size1
Material PackageDouble Easy-Open bag
Transport Information
Supplemental Information
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L
Global Trade Item Number
产品目录编号 GTIN
KVGLA3TTT1 04053252344855

Documentation

Material Qualification Dossier

标题版本
1.0

Quality Management Dossier (Open Access)

Title

Operational Excellence Dossier

Title

质量证书

标题
OPticap XLT 30 Capsule Durapore Membrane C7HA08254
Opticap XLT 30 Capsule Durapore Membrane C2MB18422
Opticap XLT 30 Capsule Durapore Mebrane C9PA17017
Opticap XLT 30 Capsule Durapore Membrane C7EA11836
Opticap XLT 30 Capsule Durapore Membrane C0AB84891Z
Opticap XLT 30 Capsule Durapore Membrane C0CB35820Z
Opticap XLT 30 Capsule Durapore Membrane C0CB39753Z
Opticap XLT 30 Capsule Durapore Membrane C0DB60995Z
Opticap XLT 30 Capsule Durapore Membrane C0MB13699Z
Opticap XLT 30 Capsule Durapore Membrane C1CB16268
Show more

技术信息

标题
Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
Establishing Product Specific Bubble Point Specifications For Sterilizing-Grade Filters
Simplified, efficient sizing of sterilizing-grade normal flow filters for buffer solutions

数据表

标题
Durapore® Family Guide

用户指南

标题
Opticap® XL Capsules and Opticap® XLT Capsules

相关产品和应用

产品族

Durapore® 0.1 µm and 0.22 µm Capsule Filters

Sterilizing-grade 0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes are low protein binding and provide sterility assurance, high flow rates and throughputs.
详细了解 >>

Durapore® 0.1 µm and 0.22 µm Capsule Filters

0.1 µm and 0.22 µm hydrophilic polyvinylidene fluoride (PVDF) membranes for sterile liquid filtration
详细了解 >>

相关产品，按下列排序： Brand Facete

Opticap®

种类

Biopharmaceutical Manufacturing > Downstream Processing > Sterile Filtration > Sterile Liquid > Durapore