Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

386445 Hybridoma Subisotyping Kit, Mouse

Hybridoma Subisotyping Kit, Mouse MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
386445
Purchase on Sigma-Aldrich

概述

Replacement Information

Products

产品目录编号包装 数量 / 包装
386445-1KITCN 玻璃瓶 1 kit
Description
OverviewUseful to confirm the purity of cell lines in monoclonal antibody development assays. Sufficient to perform 900 assays (150 clones).
Catalogue Number386445
Brand Family Calbiochem®
References
Product Information
Kit containsAntibodies to IgA, IgG₁, IgG2a, IgG2b, IgG₃, IgM, anti-mouse peroxidase conjugate, TMB substrate solution, PBS concentrate, surfactant, and a user protocol.
Quality LevelMQ100
Applications
Biological Information
Physicochemical Information
Dimensions
Materials Information
Toxicological Information
Safety Information according to GHS
Safety Information
R PhraseR: 36/37/38

Irritating to eyes, respiratory system and skin.
S PhraseS: 26-36

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable protective clothing.
Product Usage Statements
Storage and Shipping Information
Ship Code Ambient Temperature Only
Toxicity Multiple Toxicity Values, refer to MSDS
Storage +2°C to +8°C
Storage ConditionsUpon arrival store the entire contents of the kit at 4°C.
Do not freeze Ok to freeze
Packaging Information
Transport Information
Supplemental Information
Kit containsAntibodies to IgA, IgG₁, IgG2a, IgG2b, IgG₃, IgM, anti-mouse peroxidase conjugate, TMB substrate solution, PBS concentrate, surfactant, and a user protocol.
Specifications
Global Trade Item Number
产品目录编号 GTIN
386445-1KITCN 04055977189919

Documentation

Hybridoma Subisotyping Kit, Mouse MSDS

职位

物料安全数据表 (MSDS) 

Hybridoma Subisotyping Kit, Mouse 分析证书

标题批号
386445
用户协议

Revision19-August-2010 RFH
StorageUpon arrival store the entire contents of the kit at 4°C.
BackgroundThe Hybridoma Subisotyping Kit is intended for the detection and identification of mouse monoclonal antibody subclasses IgG1, IgG2a, IgG2b, IgM and IgA in supernatants. It is also used for confirmation of monoclonality of cloned hybridoma cultures. This double antibody detection system is a highly sensitive enzyme immunoassay method incorporating specific primary antisera. Assay sensitivity is less than 1 µg/ml and can be reliably used with diluted culture supernatants. The following protocol utilizes 50 µl X 7 (350 µl) of each supernatant tested (a 1:2 dilution occurs as each sample is added to diluent in each well). When supernatant medium is precious, the medium from high producer cells can be diluted much more (1:10 or greater), with appropriate modifications in the Application of Supernatants section. When used as directed, the reagents in this kit will be sufficient for 900 determinations or 150 clones
Materials provided• Goat Anti-Mouse Igs (Kit Component No. KP4001): (Plate Coating Reagent) 3 ml
• Rabbit Anti-Mouse IgG₁ (Kit Component No. KP4002): 15 ml
• Rabbit Anti-Mouse IgG2a (Kit Component No. KP4003): 15 ml
• Rabbit Anti-Mouse IgG2b (Kit Component No. KP4004): 15 ml
• Rabbit Anti-Mouse IgG₃ (Kit Component No. KP4005): 15 ml
• Rabbit Anti-Mouse IgM (Kit Component No. KP4007): 15 ml
• Rabbit Anti-Mouse IgA (Kit Component No. KP4006): 15 ml
• Goat Anti-Rabbit IgG, Peroxidase Conjugated (Kit Component No. KP4008): 250 µl
• Plate Coating Solution (Kit Component No. KP4009): 15 ml
• Blocking Serum (Kit Component No. KP4010): 50 ml
• TMB Substrate (Kit Component No. KP4011): 125 ml
• PBS Concentrated Buffer Solution (Kit Component No. KP4012): 2 X 125 ml
• Surfactant (Kit Component No. KP4013): 1.25 ml
Detailed protocolApplication of Capture Antibody

1. Dilute Stock Plate Coating Solution with distilled water, using 9.0 ml distilled water with 1.0 ml coating solution for each plate to be coated.
2. Add 100 µl of Goat Anti-Mouse Igs (Plate Coating Reagent) to the 10 ml of Plate Coating Solution.
3. Add 100 µl of this plate coating mixture to each well of a 96-well EIA plate.
4. Stack or seal plates and incubate 18-24 h at 4°C. If you will not use plates immediately, shake out contents and allow to air dry; cover with sealing film. Plates prepared in this manner have been shown to remain usable for several weeks.

Application of Supernatants

1. Dilute PBS concentrate using 5 ml concentrate for each 100 ml of buffer required. For every liter of buffer, add 500 µl of surfactant to reduce non-specific binding. (This buffer will be used in steps 4 and 6 and in step 1 of Application of Conjugate) A 500 ml squeeze bottle is a convenient container for the PBS-surfactant for the washing steps.
2. Remove coated plate(s) from refrigeration, shake out the contents into a sink and pat dry on a clean towel.
3. Wash the plate(s) with PBS-surfactant using a gentle stream from the squeeze bottle and filling each well. Be sure that no air bubbles are trapped in any of the wells that could prevent complete washing and may result in an incorrect reading at the end of the test. Pat dry with a clean towel.
4. Wash twice more (repeating step 3).
5. Dilute blocking serum 1:4 with 1X PBS.
6. Add 200 µl of diluted blocking serum to each well.
7. Incubate plate(s) at room temperature for 1 h.
8. Wash the plate(s) with PBS-surfactant and pat dry with a clean towel.
9. Add 50 µl of each hybridoma supernatant to one column of 8 wells. (We suggest using mouse serum diluted 1:500 as a positive control in one column.)
10. Incubate plate(s) at room temperature for 1 h.

Application of Subisotyping Antisera

1. Shake out contents of the incubated plate(s) and pat dry.
2. Wash plate(s) with water, saline, or PBS and pat dry. Again, check that no air bubbles are trapped.
3. Wash twice more
4. Add two drops from each of the typing antisera bottles to a different well for each hybridoma tested (e.g. anti-IgM to each well of the top row across, anti-IgA to each well of the second row, etc.).
5. Add 100 µl of PBS-surfactant to any wells that do not receive antiserum. These wells will be negative controls.
6. Incubate plate(s) at room temperature for 1 h.

Application of Conjugate

1. Dilute the peroxidase conjugate 1:4,000 with PBS-surfactant (add 2.5 µl of conjugate to 10 ml of PBS-surfactant).
2. Shake out the contents of the antisera incubated plate(s) and pat dry.
3. Wash plate(s) with saline or PBS and pat dry. Repeat washes twice more.
4. Add 100 µl of diluted conjugate to each well.
5. Incubate plate(s) at room temperature for 1 h.
6. Shake out contents of plate(s) and pat dry.
7. Wash plate(s) with saline or PBS and pat dry. Repeat washes twice more.

Application of Substrate:

The ready-to-use TMB substrate reagent is stable at 4°C and produces a blue color that can be read at 655 nm. Addition of acid as a stop solution enhances sensitivity 2-4 times and produces a yellow color that can be read at 450 nm. TMB is light sensitive and should be stored in the dark. For best results, remove the amount needed and transfer to a clean container before adding to plates. Always use a clean pipette tip to remove reagent from bottle to avoid contamination. The solution is clear to very faint blue (contamination turns the solution blue).
1. Using the substrate reagent as supplied, add 100 µl to each well.
2. Color development should be rapid and may be complete in 5-10 min.
3. Positive wells will develop a bright blue color; negative wells will retain a clear to faint blue color. Read plate at 655 nm.
4. Stop color development (or enhance sensitivity) by adding 50 µl of 1 M phosphoric acid to each well and read at 450 nm.
Plate configurationCulture Supernatants
        1     2     3     4     5     6     7     8     9     10     11     Mouse Serum
Anti-M
Anti-G₁
Anti-G2a
Anti-G2b
Anti-G₃ Anti-A
Registered TrademarksCalbiochem® is a registered trademark of EMD Chemicals, Inc.
Interactive Pathways™ is a trademark of EMD Chemicals, Inc.