Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

109164 0.1 mol/l 汉纳斯溴化碘溶液

for determination of iodine number c(IBr) = 0.1 mol/l Titripur®

0.1 mol/l 汉纳斯溴化碘溶液 MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.

同义词: Iodine solution acc. to Hanus

109164
Purchase on Sigma-Aldrich

概述

Replacement Information

Products

产品目录编号包装 数量 / 包装
1.09164.1000 玻璃瓶 1 l
1.09164.1003 玻璃瓶 1 l
描述
产品目录编号109164
同义词Iodine solution acc. to Hanus
参考
产品信息
HS代码3822 19 90
Quality LevelMQ200
应用
生物信息
理化信息
密度1.06 g/cm3 (20 °C)
闪点40 °C
pH值<1 (H₂O, 20 °C)
尺寸
材料信息
毒性学信息
GHS安全信息
危害性图示 危害性图示
危害性图示
危害性声明H226: 易燃液体和蒸气。
H314: 造成严重皮肤灼伤和眼损伤。
注意事项声明P210: 远离热源、热表面、火花、明火和其他点火源。禁止吸烟。
P233: 保持容器密闭。
P240: 容器和装载设备接地并等势联接。
P280: 配戴防护手套/防护服/护目用具/防护面具/听力保护装备.
P303 + P361 + P353: 如皮肤（或头发）沾染：立即脱掉所有沾染的衣服。用水清洗皮肤。
P305 + P351 + P338: 如进入眼睛：用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出，取出隐形眼镜。继续冲洗。
提示语危险
储存类别3 易燃液体
WGKWGK 2 严重水危害
一次性12
无机酸及酸酐应在冰水中小心地搅拌 稀释或水合,接着以氢氧化钠(编号:105587)中和(使用手套, 通风橱). 在归入第 D类之前,以广用试纸(编号:109535)测定 pH值. 发烟硫酸必须在搅拌中一次一滴的小心加入40%的 硫酸之中(编号:109286). 手持大量冰块以冷却. 当冷却足 够之后, 以上述方法处理高浓度的硫酸. 酸性蒸气(溴化 氢, 氯化氢, 碘化氢, 氯气, 光气, 二氧化硫)应通入稀氢 氧化钠溶液并以上述处理无机酸的方式处理.
安全信息
危险种类???, ?????
产品使用声明
储存和货运信息
储存于 +15°C 到 +25°C储存.
包装信息
运输信息
申报（铁路和陆路）ADR、RIDUN 2789 , 8 (3), II
申报（空运）IATA-DGRUN 2789 , 8 (3), II
申报（海运）IMDG-代码UN 2789 , 8 (3), II, Segregation Group: 1 (Acids)
补充信息
规格
Formliquid
Amount-of-substance concentration0.0994 - 0.1006 mol/l
Measurement uncertainty+/- 0.0004
TraceabilityNIST SRM
The stated batch and specification values for the amount of substance concentration are valid at the time of bottling.
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is determined with standardized sodium thiosulfate solution (article number 1.09147). The sodium thiosulfate solution is standardized and traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 136 potassium dichromate) by means of volumetric standard potassium iodate (article number 1.02404), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The concentration of this volumetric solution decreases over time, due to its chemical properties. If high accuracy is expected, the titer, being a corrective factor that compensates for this effect as well as variations of equipment, personal handling, temperature and other laboratory conditions, must be determined directly after opening a new bottle and should be verified at regular intervals.
Global Trade Item Number
产品目录编号 GTIN
1.09164.1000 04022536111483
1.09164.1003 04054839999376