Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

109065 Perchloric acid

in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP

Perchloric acid MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Grade: Reag. Ph Eur,Reag. USP
109065
Purchase on Sigma-Aldrich

Overview

Replacement Information

Key Spec Table

Grade Value
Reag. Ph Eur,Reag. USP

Products

Catalogue NumberPackaging Qty/Pack
1.09065.1000 Glass bottle 1 l
1.09065.1003 Glass bottle 1 l
Description
Catalogue Number109065
References
Product Information
GradeReag. Ph Eur,Reag. USP
HS Code3822 90 00
Quality LevelMQ200
Applications
Biological Information
Physicochemical Information
Density1.06 g/cm3 (20 °C)
Flash point40 °C
Ignition temperature485 °C
pH value0.1 (H₂O, 20 °C)
Dimensions
Materials Information
Toxicological Information
Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Pictogram(s)
Hazard Statement(s)H226: Flammable liquid and vapour.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P240: Ground and bond container and receiving equipment.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal WordDanger
Storage class3 Flammable liquids
WGKWGK 1 slightly hazardous to water
Disposal22
Inorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I.
Safety Information
Categories of dangerflammable, corrosive
Product Usage Statements
Storage and Shipping Information
StorageStore at +15°C to +25°C.
Packaging Information
Transport Information
Declaration (railroad and road) ADR, RIDUN 2789 , 8 (3), II
Declaration (transport by air) IATA-DGRUN 2789 , 8 (3), II
Declaration (transport by sea) IMDG-CodeUN 2789 , 8 (3), II, Segregation Group: 1 (Acids)
Supplemental Information
Specifications
Formliquid
Amount-of-substance concentration0.0995 - 0.1005 mol/l
Measurement uncertainty+/- 0.0003
Water content (according to Karl Fischer)0.1 - 0.2 %
TraceabilityNIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Global Trade Item Number
Catalogue Number GTIN
1.09065.1000 04022536110295
1.09065.1003 04054839533693

Related Products & Applications

Accessories (Primary)

Catalogue Number Description
102408 Tris(hydroxymethyl)aminomethane
106202 1-Naphtholbenzein

Accessories (Secondary)

Catalogue Number Description
102408 Tris(hydroxymethyl)aminomethane

Related Products By: Application Facete

Titration

Related Products By: Brand Facete

TitriPUR®

Categories

Reagents, Chemicals and Labware > Inorganic Reagents > Instrumental Inorganic Analysis > Volumetric Solutions Titripur®, Titripac®, Titrisol®, Titriplex® > Titripur® Ready-to-use Solutions