Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KR10A05FF1 Opticap® XL5 Polygard®-CR 10.0 µm 3/4 in. TC/TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
KR10A05FF1
1  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Description
Catalogue NumberKR10A05FF1
Trade Name
  • Opticap®
DescriptionOpticap® XL5 Polygard®-CR 10.0 µm 3/4 in. TC/TC
Product Information
FormatSingle Layer
Device ConfigurationCapsule
Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)4.8 bar (70 psid) @ 20 °C
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaPolygard®-CR
Sterilization3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
Physicochemical Information
Pore Size10.0 µm
Inlet ConnectionSanitary Flange
Outlet ConnectionSanitary Flange
Gravimetric ExtractablesThe extractables level was equal to or less than 30 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Inlet Temperature25 °C
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length5 in. (12.5 cm)
Length21.6 cm (8.5 in.)
Diameter10.7 cm (4.2 in.)
Inlet to Outlet Width21.6 cm (8.5 in.)
Device Size5 in.
Inlet Connection Diameter3/4 in.
Nominal Pore Size10.0 µm
Outlet Connection Diameter3/4 in.
Materials Information
Chemistry
  • Polypropylene (PP)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Packaging Information
Material Size1
Material PackageDouble Easy-Open bag
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥2.5 L
Global Trade Item Number
Catalogue Number GTIN
KR10A05FF1 04053252459078