Millipore Sigma Vibrant Logo

CS40MS01H1 Clarisolve® 40 µm Lab Scale Depth Filters, 0.014 m2 (0.15 ft2)

High-density cell cultures

MSDS (material safety data sheet) o SDS, certificato d’analisi (CoA) e certificato di qualità (CoQ), dossier, brochure e altri documenti disponibili.
View Products on Sigmaaldrich.com
CS40MS01H1
1  
Non è stato possibile trovare il prezzo
La quantità minima deve essere un multiplo di
Maximum Quantity is
Al termine dell'ordine Maggiori informazioni
Lei ha salvato ()
 
—
Richiedi il prezzo
—
Disponibilità limitata Disponibilità limitata
A magazzino 
Fuori produzione
Disponibili quantità limitate
La disponibilità deve essere confermata
    Prodotti rimanenti: riceverà un nostro avviso
      Prodotti rimanenti: riceverà un nostro avviso
      Will advise
      Contatti il Servizio Clienti
      Contact Customer Service

       

      Contatti il Servizio Clienti

      Panoramica

      Description
      Catalogue NumberCS40MS01H1
      Trade Name
      • Clarisolve®
      DescriptionClarisolve® 40 µm Lab Scale Depth Filters, 0.014 m2 (0.15 ft2)
      Product Information
      Device Configurationlab scale Pod
      Filter Grade40MS
      Maximum Differential Pressure, bar (psid)Maximum: 2.1 bar (30 psid) @ 37 °C; Forward: 2.1 bar (30 psid) @ 4 ° or 37 °C; Reverse: 2.1 bar (30 psid) @ 37 °C
      Quality LevelMQ400
      Applications
      ApplicationHigh-density cell cultures
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique (on filter media only)
      SterilizationIntegrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
      Physicochemical Information
      Product Water Conductivity at 25°C0.91 – 1.29 µS/cm post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.
      Dimensions
      Height14 cm (5.3 in.)
      Width7.4 cm (2.9 in.)
      Length22 cm (8.5 in.)
      Filtration Area0.014 m²
      Materials Information
      Chemistry
      • Polypropylene (PP)
      Device Material
      • Polypropylene
      Materials of ConstructionPolypropylene and Millistak+® media
      Seal MaterialThermo Plastic Elastomer (TPE)
      Packaging Information
      Material Size1
      Specifications
      Metals
      • Per 24-hour static soak in 10 liters pure water post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft2 (100 L/m2) of surface area:
        Aluminum (AI): 0.000 mg/ft2
        Antimony (Sb): <0.001 mg/ft2
        Arsenic (As): ≤0.005 mg/ft2
        Barium (Ba): ≤0.139 mg/ft2
        Bismuth (Bi): below detectable limits
        Boron (B): below detectable limits
        Cadmium (Cd): 0.000 mg/ft2
        Calcium (Ca): ≤10.06 mg/ft2
        Chromium (Cr): ≤0.017 mg/ft2
        Cobalt (Co): <0.001 mg/ft2
        Copper (Cu): ≤0.012 mg/ft2
        Gallium (Ga): ≤0.003 mg/ft2
        Germanium (Ge): ≤0.002 mg/ft2
        Iron (Fe): ≤0.101 mg/ft2
        Lead (Pb): <0.001 mg/ft2
        Lithium (Li): ≤0.003 mg/ft2
        Magnesium (Mg): ≤6.86 mg/ft2
        Manganese (Mn): ≤0.013 mg/ft2
        Mercury (Hg): ≤0.002 mg/ft2
        Molybdenum (Mo): ≤0.023 mg/ft2
        Nickel (Ni): ≤0.006 mg/ft2
        Potassium (K): ≤3.77 mg/ft2
        Silver (Ag): below detectable limits
        Sodium (Na): ≤27.1 mg/ft2
        Strontium (Sr): ≤0.042 mg/ft2
        Tin (Sn): 0.000 mg/ft2
        Titanium (Ti): ≤0.189 mg/ft2
        Tungsten (W): ≤0.003 mg/ft2
        Vanadium (V): ≤0.011 mg/ft2
        Zinc (Zn): ≤0.014 mg/ft2
      TOC0.9–1.2 µg/L post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values. TOC for 60HX media was measured at below detectable limits.
      Global Trade Item Number
      Numero di catalogo GTIN
      CS40MS01H1 04053252920233