Millidisk® Sanitary Cartridge Housings
Produtos recomendados
-
513001-1ML Sigma-Aldrich InSolution™ PD 98059 - CAS 167869-21-8 - Calbiochem -
8009200100 Sigma-Aldrich Ftalato de diciclohexilo -
1027330250 Supelco Cloreto de cobre(II) dihidratado -
102282 Supelco Vermelho de quinaldina -
XX6702508 Millipore Tubo de 1/4" D.E.; max. 200 psi, polipropileno -
HATF02500 Millipore discos de 25 mm -
FTPF10702 Milli-Q FTPF10702 -
1370401000 SAFC 2-PROPANOL 70 % (v/v) -
CHGL73TP3 Millipore Durapore® Cartridge Filter 30 in. 0.45/0.22 µm Code 7
Panorama geral
Especificações
Informações para pedidos
Documentation
Produtos e aplicações relacionadas
Famílias de produtos
Aervent® Membrane in Optiseal®-M FiltersOptiseal-M filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.Saiba mais >> |
Produtos relacionados por: Application Facete
| Dialysis and Filtration |
Produtos relacionados por: Brand Facete
| Millidisk® |
Categorias
| Biopharmaceutical Manufacturing > Downstream Processing > Multi-use Processing Systems > Filter Housings |
Description
These cartridge housings are designed to handle the most critical sterile filtration steps for industrial processing applications.
This line of sanitary 316L stainless steel housings features T-line and In-line versions. Both come standard with sanitary vents. The In-line come with sanitary drain.
Each housing is tested to ensure that it meets specifications for quality standards. To demonstrate Millipore's commitment to quality, each housing includes a Certificate of Quality certifying that the housing conforms to specifications for material, surface finish, pressure rating and dimensions. Each certificate is lot and catalogue number specific.
Typical Applications
- Sterile filtration of aqueous and solvent-based solutions
- Sterile tank venting
- Sterile gas filtration
Dimensions
| Inlet to Outlet Width | Length | Weight | |
| In-line 10 stacks Housing | 13.2 cm (5.2 in.) | 13.2 cm (5.2 in.) | 2.3 kg (5.0 lb.) |
| In-line 40 stacks Housing | 19.8 cm (7.8 in.) | 19.8 cm (7.8 in.) | 2.7 kg (6 lb.) |
| T-line 40 stacks Housing | 17.8 cm (7 in.) | 22.1 cm (8.7 in.) | 2.95 kg (6.5 lb.) |
| Materials of Construction | |
| Housing | 316L stainless steel |
| Clamp | 304 stainless steel |
| Seals | Silicone (SI) |
| Vent Insulators | EPDM |
| Maximum Operating Pressure, bar (psi) | 10 bar (145 psi) |
| Surface Finish | |
| Wetted Surfaces | Fine electropolished sanitary finish, Ra <0.5 µm (20 µin) |
| Exterior Surfaces | Sanitary finish Ra <0.8 µm (32 µin) |
| Connections | |
| Inlet/Outlet | 1 in. Sanitary Flange |
| Gauge Port | 1 in. Sanitary Flange |
| Cartridge | Code M (2-118) O-rings |
| Dome to Base | 3 in. O-ring (2-335) |
| Sterilization | Millidisk housings may be in-line steam sterilized, autoclaved at 126 °C for 30 minutes, or hot water sanitized |