Le fait de fermer ne sauvegardera pas votre configuration à moins que vous n'ajoutiez l'article à votre Panier d'achat ou à vos Favoris.
Cliquer sur OK pour fermer l'outil MILLIPLEX® MAP ou sur Annuler pour retourner à votre sélection.
Choisissez des Panels configurables & des Kits préconfigurés - OU - des MAPmate™ de signalisation cellulaire
Concevez vos kits MILLIPLEX® MAP et obtenez leur prix.
Panels configurables & Kits préconfigurés
Notre large gamme est constituée de panels multiplex qui vous permettent de choisir, au sein d'un panel, les analytes qui répondent le mieux à vos besoins. Sur un autre onglet, vous pouvez choisir un format cytokine préconfiguré ou un kit Simplex.
Kits de signalisation cellulaire & MAPmate™
Choisissez des kits préconfigurés qui permettent d'explorer l'ensemble des voies ou des processus. Ou concevez vos propres kits en choisissant des Simplex MAPmate™ et en suivant les instructions fournies.
Les MAPmate™ suivants ne peuvent pas être utilisés ensemble : -des MAPmate™ qui nécessitent des tampons différents -des paires de MAPmate™ totaux et phospho-spécifiques, par ex. GSK3β total et GSK3β (Ser 9) -des MAPmate™ PanTyr et spécifiques d'un site, par ex. Récepteur Phospho-EGF et phospho-STAT1 (Tyr701) -Plus d'un phospho-MAPmate™ pour une seule cible (Akt, STAT3). -GAPDH et β-Tubuline ne peuvent pas être utilisés avec les kits ou les MAPmate™ contenant panTyr.
.
Référence
Guide d'achat
Qté
Liste
Cet article a été ajouté à vos favoris.
Sélectionner une espèce, un type de panel, un kit ou un type d'échantillon
Pour commencer à concevoir votre kit MILLIPLEX® MAP, sélectionnez une espèce, un type de panel ou un kit d'intérêt.
Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
Cet article a été ajouté à vos favoris.
Espèce
Type de panel
Kit sélectionné
Qté
Référence
Guide d'achat
Qté
Prix tarif
96-Well Plate
Qté
Référence
Guide d'achat
Qté
Prix tarif
Ajouter des réactifs supplémentaires (Un kit "Buffer and Detection Kit" est nécessaire pour une utilisation avec les MAPmate™)
Qté
Référence
Guide d'achat
Qté
Prix tarif
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
Option de gain de place Nos clients qui commandent plusieurs kits peuvent choisir d'économiser de l'espace de stockage en éliminant l'emballage de chaque kit et de recevoir les composants de leur essai multiplex conditionnés sous poches en plastique pour un stockage plus compact.
Cet article a été ajouté à vos favoris.
Ce produit a été ajouté à votre panier.
Vous pouvez maintenant concevoir un autre kit personnalisé, choisir un kit pré-configuré, régler vos achats ou fermer l'outil de commande.
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More
GR08L
Sigma-AldrichAnti-Transferrin Receptor (Ab-1) Mouse mAb (T56/14)
This Anti-Transferrin Receptor (Ab-1) Mouse mAb (T56/14) is validated for use in FC, IF, IP, Immunoblotting for the detection of Transferrin Receptor (Ab-1).
More>>This Anti-Transferrin Receptor (Ab-1) Mouse mAb (T56/14) is validated for use in FC, IF, IP, Immunoblotting for the detection of Transferrin Receptor (Ab-1). Less<<
FDS (Fiches de données de sécurité), certificats d’analyse (CoA) et de qualité (CoQ), dossiers, brochures et autres documents disponibles.
Recognizes the ~90 kDa (monomeric) and the ~180 kDa (dimeric) transferrin receptor in the plasma membrane in proliferating cells.
Catalogue Number
GR08L
Brand Family
Calbiochem®
Synonyms
Anti-CD71, Anti-TR
References
References
Schneider, C., et al., 1982. J. Biol. Chem.257, 8516. Trowbridge, I.S. and Lopez, F., 1982. Proc. Natl. Acad. Sci. USA, 1175. Aisen, P. and Listowsky, I., 1980. Ann. Rev. Biochem.49, 357. Omary, M.B., et al. 1980. Nature286, 888. Seligman, P.A., et al. 1979. J. Biol. Chem.254, 9943.
Antibody should be titrated for optimal results in individual systems.
Biological Information
Immunogen
K562 cells
Immunogen
Human
Clone
T56/14
Host
Mouse
Isotype
IgG₁
Species Reactivity
Human
Antibody Type
Monoclonal Antibody
Physicochemical Information
Dimensions
Materials Information
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Ship Code
Ambient Temperature Only
Toxicity
Standard Handling
Storage
+2°C to +8°C
Do not freeze
Ok to freeze
Special Instructions
We recommend resuspending the lyophilized antibody with sterile PBS, pH 7.4, or sterile 20 mM Tris-saline (20 mM Tris containing 0.15 M NaCl), pH 7.4, to yield a final concentration of 100 µg/ml; product will be more stable if 0.1% sodium azide is included (do not add sodium azide if antibody is to be used with viable cells). Lyophilized antibodies should be resuspended at 4°C with occasional gentle mixing for at least 2 h. Following reconstitution, refrigerate (4°C) for short-term storage or aliquot and freeze (-20°C) for long-term storage. Avoid freeze/thaw cycles of solutions.
Packaging Information
Transport Information
Supplemental Information
Specifications
Global Trade Item Number
Référence
GTIN
GR08L-100UG
04055977228199
Documentation
Anti-Transferrin Receptor (Ab-1) Mouse mAb (T56/14) FDS
Anti-Transferrin Receptor (Ab-1) Mouse mAb (T56/14) Certificats d'analyse
Titre
Numéro de lot
GR08L
Références bibliographiques
Aperçu de la référence bibliographique
Schneider, C., et al., 1982. J. Biol. Chem.257, 8516. Trowbridge, I.S. and Lopez, F., 1982. Proc. Natl. Acad. Sci. USA, 1175. Aisen, P. and Listowsky, I., 1980. Ann. Rev. Biochem.49, 357. Omary, M.B., et al. 1980. Nature286, 888. Seligman, P.A., et al. 1979. J. Biol. Chem.254, 9943.
Fiche technique
Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.
Purified mouse monoclonal antibody generated by immunizing Balb/c mice with the specified immunogen and fusing splenocytes with S194/5XXO.BU.1 mouse myeloma cells (see application references). Recognizes the ~90 kDa (monomeric) and the ~180 kDa (dimeric) transferrin receptor protein.
Background
Transferrin is the major iron binding protein in human plasma and is bound by a specific cell surface receptor during transport of iron into various tissues. The human transferrin receptor was originally isolated from placenta and shown to contain a subunit with an apparent molecular weight of 90,000. Further structural characterization of the receptor revealed that it resides in the plasma membrane as a 180,000 dimer, has a pI of 5.2, is phosphorylated predominantly on serine residues and contains both complex and high mannose oligosaccharide chains. Transferrin receptor is considered to be a marker for proliferating cells and its levels can be drastically reduced by agents which cause differentiation of undifferentiated cells such as HL-60 cells. Since many of the enzymes of metabolically active, proliferating cells require iron to catalyze redox reactions it is not surprising that the transferrin receptor would be a marker of proliferation. Further support for this hypothesis has been obtained by using antibodies to block transferrin binding and cause the accumulation of cells in S-phase, presumably due to interference with normal iron uptake and energy metabolism. Thus, monoclonal antibodies recognizing the transferrin receptor are not only valuable tools for studying iron metabolism, but may also be useful for monitoring and possible therapy of diseases involving highly proliferative cells.
Host
Mouse
Immunogen species
Human
Immunogen
K562 cells
Clone
T56/14
Isotype
IgG₁
Species
human
Positive control
Most cell lines or placental tissue
Form
Lyophilized
Formulation
Lyophilized from a volatile buffer, 100 µg BSA.
Preservative
None
Comments
Antibody should be titrated for optimal results in individual systems.
Storage
+2°C to +8°C
Do Not Freeze
Ok to freeze
Special Instructions
We recommend resuspending the lyophilized antibody with sterile PBS, pH 7.4, or sterile 20 mM Tris-saline (20 mM Tris containing 0.15 M NaCl), pH 7.4, to yield a final concentration of 100 µg/ml; product will be more stable if 0.1% sodium azide is included (do not add sodium azide if antibody is to be used with viable cells). Lyophilized antibodies should be resuspended at 4°C with occasional gentle mixing for at least 2 h. Following reconstitution, refrigerate (4°C) for short-term storage or aliquot and freeze (-20°C) for long-term storage. Avoid freeze/thaw cycles of solutions.
Toxicity
Standard Handling
References
Schneider, C., et al., 1982. J. Biol. Chem.257, 8516. Trowbridge, I.S. and Lopez, F., 1982. Proc. Natl. Acad. Sci. USA, 1175. Aisen, P. and Listowsky, I., 1980. Ann. Rev. Biochem.49, 357. Omary, M.B., et al. 1980. Nature286, 888. Seligman, P.A., et al. 1979. J. Biol. Chem.254, 9943.
Application references
Original Clone
Trowbridge, I.S. and Omary, M.B., 1981. Proc. Natl. Acad. Sci. USA 3039.